Thread Tools

***SharpShooter76*** · June 16th, 03:47 PM

Ok guys I have a 06 piranha gti eforce and it keeps sputtering. CO2 isnt the problem either i used HPA the last time and it was still sputtering. I took out the bolt and clean and lubed it as well as turn the velocity down. Any ideas on whats wrong and how to fix it?

**freakpizzaboy** · June 16th, 03:49 PM

it could be an o ring or a cup sear?? But i think the biggest possiblity is something is wrong with the bolt or the hammer, make sure nothing is blocking the way for the bolt, and make sure the bolt is attached to the hammer, perhaps take it to a proshop for someone who can give you a hands on idea of whats wrong with the marker

EDIT: also try a new battery

***SharpShooter76*** · June 16th, 03:59 PM

Thanks. Yeah my rechargeable one wasnt working so I put a new one in, but it was sputtering before that anyway.

**Nor*Tex** · June 16th, 04:01 PM

You mgiht be out of air.

Check your cupseal, all orings

**freakpizzaboy** · June 16th, 04:01 PM

wait so is it working or not?

***SharpShooter76*** · June 16th, 04:18 PM

Its not working, im prolly gonna take iinto my shop this week.

**freakpizzaboy** · June 16th, 04:25 PM

yea, i mean, its always good to have someone who knows what there talking about look at it first hand

***SharpShooter76*** · June 16th, 04:32 PM

Yup i just hope it isnt something stupid that I could have done, and they charge my $20 for it.

**iluvwpg** · June 16th, 04:46 PM

Uhmm....my rodeo used to sputter too, idk if the 06 gti has a reg or not, if it does adjust it so that the pressure is higher. If the pressure isn't high enough, the striker won't latch the first time, causeing ''sputtering''.

**SCATHED** · June 17th, 06:41 PM

this has happened to me before. all i h ad to do was lube the bolt and hammer. just try that. Most problems with piranha's are easy fixes.

***SharpShooter76*** · June 17th, 09:23 PM

I did that already and it still does it.

**SCATHED** · June 18th, 01:49 PM

try turning up your pressure. It sounds like the gun isn't gettting enouph pressure to re-cock the bolt.

**HomE SkiLLeT** · June 18th, 01:55 PM

Or maybe your sear, it might be rounded off.

***SharpShooter76*** · June 18th, 02:06 PM

How do I turn up the pressure?

**HomE SkiLLeT** · June 18th, 02:23 PM

You can't turn the pressure up, it doesn't have a regulator.

***SharpShooter76*** · June 18th, 02:59 PM

Thats what I thought.

**SCATHED** · June 18th, 03:20 PM

then turn up your velocity

***SharpShooter76*** · June 18th, 04:40 PM

I'll try that next time