Thread Tools

**paintballin34** · July 15th, 02:38 PM

After getting a new reg from PMI it still won't work right. Won't always recock and will double feed sometimes. Could be detents on that. It recocks correctly when you turn up the reg but then your velocity is to high. I'm going to try some springs to up the operating presure. I'm also going to pull one of the reg guts and run it right from my hpa after I get the spring kit. Darn thing shoots good when shoots. It has a manual grip on it to. More trouble than it's worth..

JH · July 15th, 10:43 PM

do you have a question or were you just stating whats going on?

**toXic** · July 15th, 11:20 PM

Double feeding could be the detents or the hopper(if you have like a halo or something). About it uncocking the springs should take care of that. But you could check the sear out also.

**paintballin34** · July 16th, 09:51 AM

Hadn't thought of the sear. Detent should be good but it might have failed. I'm only using a TSA on it so thatn's not a prob.. I'm looking for ideas on this one. Gun shoots good when it shoots.

JH · July 16th, 09:53 AM

check the springs and sear. make sure your tank is filled all the way. make sure the velocity is right. check all your hoses and stuff for leaks when it doesnt shoot.

**paintballin34** · July 17th, 06:35 PM

Good advice! I'll get it workin soon..

JH · July 17th, 10:58 PM

check for leaks that could be it. a small one could cause enough pressure loss to not allow the gun to recock

JH · July 18th, 08:07 PM

any progress?

**paintballin34** · July 19th, 08:29 AM

Waiting on springs! Should be here soon!

JH · July 19th, 10:58 PM

let me know how this goes i want to know what was wrong

**paintballin34** · August 6th, 11:33 AM

Got the springs, did some dry firing. Still has probs. Not giving up, just not high on the priority list. I'll let you all know how it works out when I finally get it fixed.