sterling47

ive had this gun for awhile and haven't used this just got a tank for it and stuff i tryed to shoot it and it clicks but the sear release doesn't go any help? doesn't seem like the motor is clicking it down far enough (i ma paintball newb sorry if this is a stupid question )

Trbo323

if you just got the tank its probably empty. try pushing down on the pin where the co2 comes out, if you can push it down it means the tank is empty.

__________________

blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off

2.0

Check your battery, could be low. If so the noid might click but not travel far enough to push the sear down.

__________________

sterling47

filled the tank and bran new battery anything else?

Trbo323

oil it up and try again

o and be sure to use paintball specific oil, no wd-40 or motor oil

__________________

blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off

onesikpup

sometimes these things happen if you cock the gun BEFORE you turn it on....so, turn it on and then cock it.

dont remember if the asa has an on/off valve....may want to check that too and make sure its on (twisted all the way in).

give those a whirl and get back to us

__________________
FEEDBACK

Trbo323

why would something like that happen if you cock it before hand? its still a standard STBB its just using a electromagnet to trip the sear instead of the trigger

__________________

blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off