Thread Tools

rheim3000 · July 1st, 11:26 AM

I have a E-force VF from a couple years ago, its never cuased me any trouble, but I was playing this weekend and i got a small CO2 leak out of a small hole in my regulator. I kept playing with it, and once the game was over, the small leak turned huge and CO2 was flying out of the regulator as fast as it could. I'm not sure how to fix this and would love some help.

I have a pure energy inline regulator and a Ram Air assembly, both which came with the gun. I havent added any upgrades to it other than a barrel.

Thanks

**Trbo323** · July 1st, 03:08 PM

you probably just blew a o-ring in the reg, your going to have to tear it down and re-assemble it, i know you can get basic o-ring kits that have a few sizes of every o-ring in them for pretty cheap, this would be the best rout to go since you have a aftermarket reg and ram, also look up the manual for that reg online, they will offten give you all the sizes you need in the manual

rheim3000 · July 2nd, 12:36 PM

yeah i just stripped it down, the O-ring was busted.

Thanks alot

**Trbo323** · July 2nd, 01:30 PM

no prob, thats why we are here

one thing though you may want to read up and see if the manual for that reg says anyting about running co2 through it, sometimes regs are HPA only and other times they will recomend you use a AS tube in your co2 tank

***onesikpup*** · July 3rd, 07:48 PM

the PE inline reg works just fine with CO2. To keep your O rings lasting as long as they can, make sure you oil your gun after every day of play (with paintball gun oil only). CO 2 is very hard on O rings, so make sure you have a few spares when you go out to play.

Thread Tools

View more Paintball photos