Thread Tools

**Hawk** · June 18th, 05:21 PM

There is a Leak at my ASA Slug
The CO2 is shooting rapidly out of the bottom of it (Where it meets the Gun)
This has happend before, but All I did was oil my Gun and Change the O-Ring, then it was fine
But this time I did the same thing, but it Just Kept Spurting CO2

Has Anyone every had this problem with the R6 or another gun?
or Does anyone know how I could go about Fixing this problem?

**crazycupcake** · June 19th, 03:01 PM

where is it coming from again? details,details.

**Hawk** · June 19th, 04:35 PM

Umm, It is where my ASA Slug connects to my Gun, the O-ring isnt stopping the Air from comming out
I can post pictures by tonite

**Hawk** · June 19th, 09:44 PM

Here are some pictures of my Problem

Sorry for the Double post, if that matters

**crazycupcake** · June 19th, 10:02 PM

thats not an asa dude... thats called a LPC, or low pressure chamber. its an easy fix. just wrap abit of teflon tape around the threads. not alittle teflon though, put enough. it should be alittle hard to screw back in but when you do... problem solved.

**Hawk** · June 19th, 10:08 PM

...That is what it called it in the Diagram, an ASA Slug

Well, everyone else is telling me to trythe Teflon Tape, so I will Thanks
(The first guy wasent to Sure about it though)

***onesikpup*** · June 19th, 11:07 PM

thats not a place you would usually use teflon tape. im sure its worth a try. although, whatever is causing the problem will still be there. take the oring off and inspect it very carefully. look into the gun and make sure that the threads arent screwed up. also, that dont look like the correct o ring for that part (mines black, and that one on yours looks like a urethane tank o ring, but then again, your gun is newer than mine), so id advise you to look into your manual and find out.

**crazycupcake** · June 19th, 11:27 PM

it solved the problem on my gun.. i had the exact same thing happen.

**Hawk** · June 19th, 11:48 PM

Quote:

Originally posted by onesikpup
(mines black, and that one on yours looks like a urethane tank o ring, but then again, your gun is newer than mine),

The Urathane Tank O-ring is what Came on it, so I am using them

**Pr0ph3t** · June 19th, 11:51 PM

Cupseal maybe as well, on my Piranha that's where it's located.

**Hawk** · June 22nd, 04:41 PM

Yipee, where my ASA Hose connects to the Gun, the Threads are all boogered up, and at the end of the threads there is a Chip, Letting all the CO2 that it wants Out
It Threads I am talking about are on the Body of the Gun
Does anyone know where I can buy a Body For a Piranha?
I found one on eBay, but it is For a SRT, it seems like it would work for my gun but there is only one thing, It has a Gas Through grip, but it doesent have all the Parts, it is just a Body kit, It doesent have a Vertical feed for the Hopper either, I was wondering if you think it would work? with my R6 parts (Basically I need to know if i can not use the Gas Through Grip, and just hook my Hose right into the Body of the Gun

**crazycupcake** · June 22nd, 04:58 PM

my advice is just sell the parts you have now and buy a better gun dude.. its just my opinion but if i were you i wouldnt go through all the trouble.

**Hawk** · June 22nd, 05:41 PM

I am getting Closer and Closer to doing that, Should I sell them on eBay? you think?

**crazycupcake** · June 22nd, 06:15 PM

i think you should sell it... anywhere, doesnt really matter.

***D_Smalls*** · June 22nd, 08:49 PM

before you do anything.,... call pmi, they sent my buddy a whole new reciever(body).. only took a week or so... and it cost him nothing at all.

**inkjt510** · June 22nd, 08:50 PM

part it out on pbn or something...btw try not to Capitalize Every Word Kind Of Like I'm Doing Now.

**hunt15** · June 23rd, 12:45 PM

if that doesnt work call pmi or bring the gun back to where u got it and u should ge a new one for free.my friend had the same problem and he brought it back and he got a new one.no biggy if that dont work just bring it back to get a new one

**Hawk** · June 23rd, 01:32 PM

Quote:

Originally posted by inkjt510
btw try not to Capitalize Every Word Kind Of Like I'm Doing Now.

It is a Bad habit of Pressing the Shift button and capitalizing things alot, I did it on this one paper for school, that damn teacher was a dick and he gave me and 80 because I did it alot, He said if I didnt capitalize like that I wouldve gotten a 100, Hes a dumbass

Anyway, I am thinking of buying a Tippman anyway...Maybe if I get a new gun I can sell it in mint condition....and get 80 bucks for it, then buy a Tippmann 98c....HeH HeH HeH, I love cheating the system

***D_Smalls*** · June 23rd, 03:10 PM

why would you go from a piranha to a tippmann?

**Hawk** · June 23rd, 03:26 PM

Why wouldnt I....

My Friends 98 custom has given him no Problems whatsoever, I like Tippy's too, I dont know why I didnt get one in the Firstplace