Heml0ck

Greetings,

One simple and rather direct question, directed to those of you with experience with either (or both!)...

Which would be the better replacement for a SRT which will soon be fitted with an Evil Detonator regulator- the PMI Turbo valve, or the Evil valve for Piranhas?

I plan on ordering the valve when I order the regulator, and was hoping someone might suggest one over the other.


Thank you,
-Heml0ck
---------
"The greater danger for most of us lies not in setting our aim too high and falling short; but in setting our aim too low, and achieving our mark." -Michelangelo

crazycupcake

turbo valve IMO, evil sucks
and if you pmi parts get screwed, you can call them and they'll send you a brand new part.

__________________

MSN: ivan920@hotmail.com

onesikpup

here is the ranking (the way i see it)......#1 turbo valve, 2. evil valve, 3. stock valve

the evil valve only has one advantage over the stock valve, and that would be the valve pin. its shaped a certain way to allow slightly more air flow. the turbo valve on the other hand, has a greater capacity for flow, but still has the stock pin. so, the best way to go (imo), is to get a turbo valve and an evil valve pin (which also needs a special spring, but it should come with it, im not sure tho).

i do have an evil valve for sale, if you are interested

__________________
FEEDBACK

spikoman

get the turbo vavle ( lets more air through the vavle body) and the high flow valve pin with a cup seal ( lets more air around the vavle pin) best combo for an air efficent vavle and part of making and air efficent gun, i have the detonator and i plan on getting that set up i just mentioned, so when i get it i will tell you if its works good for me with the detonator.

__________________


PMI Owner #69

~Black Eforce Ext Pro 2k3~Palmers Stabilizer~Clear EgGolotion2~Silver .689 14" cp 1 pieceFBM Blade Trigger