Thread Tools

**DYNASTYfan07** · July 12th, 04:34 AM

when you turn the lock on, does it seem like your fish shoots faster with it off?

i just turned mine off and started to walk it, and it didnt seem like it was shooting as fast as when i had the lock off. 0?

what about you guys?

**bmxfreak927** · July 12th, 10:20 AM

its shoots the same rate with or without the lock on.all its doing is breaking the circuit for the other settings so u cant turn them on.

**Tordex** · July 12th, 11:09 AM

is it easy to turn the lock on and off? i want to know cus im getting my Piranha SRT E-Force today....

***D_Smalls*** · July 12th, 12:58 PM

you just take the grips off the trig frame and theres a switch on the board i believe

**DYNASTYfan07** · July 12th, 03:55 PM

you actually have to take off the whole trigger frame, then the board will be reveled, there is a plastic case that protects the board (2 little screws) unscrew themthen you lift the front of the board upand there is a little black switch under it(still on the board just on the bottom)

to tell wich is front and back, hold the trigger frame in your hand, the front im talking about should not be facing you

any more questions just ask

**crazycupcake** · July 12th, 04:00 PM

yeah, its fairly simple.
Your E-Force trigger frame is connected by 2 screws right? right.
unscrew them both and take the trigger frame off the gun.
ones its off look inside it and you should be able to see a chip/board/ looks like a hi-tech computer device.
the board will be connected by 2 little screws, one on each side of the board and it will also have a plastic cover which prevents paint and dirty from getting into the board.
now once both those screws are out, gentelly lift up the side of the board which is on the far end of the trigger frame ( the side thats closer to the barrel when the trigger frame is on)
now, at this point you have to be pretty gental or you can damage the board.
slowly lift up the board until you can see the bottom of it.
now, there should be a switch. flip it to the opposite side that its on.
BUT BE CAREFUL WITH THE BOARD, DO NOT USE FORCE WITH IT.
now put the board back into place and screw it back.
put the trigger frame back on and your tournament ready.

EDIT: OH MY GOD DYNASTYfan07, WHILE I WAS TYPING MY REPLY YOU ALREADY ANSWERED. THATS NOT FAIR!!!!