Thread Tools

**PMIKID** · July 18th, 10:36 PM

ok im playin at this game and for some reason my balls stop shooting as far and after it shoots my gun doesnt recock....this guy told me i needed to put in a new spring so i did and that seemed to work but than the thing under my barrel *not sure of the name* started leaking co2 and another guy told me i needed to replace my cup seal and i did that but it didnt work... im not sure if these 2 are related but if someone could help me out on this i would be very grateful... thanks alot

Spyder_Pimper#1 · July 18th, 10:50 PM

i think the thing you are thing you are talking about it the vavle can you post a pic of you r gun or check orings

**DYNASTYfan07** · July 18th, 10:53 PM

happend to me once (the FPS dropped dramaticly) just oil your bolt and hammer assembly, dont be afraid to over oil it...and if that doesnt work let me know

**crazycupcake** · July 19th, 12:22 AM

yUp, oil
and that thing under the barrel is called either LPC, low pressure chamber, or optimized pressure chamber. to fix the leak from it you will have to unscrew it, put a ncie amount of taflon tape on the threads and screw it back on.

**spikoman** · July 20th, 08:16 PM

crazycupcake they have oring you dont need teflon, just oil/lube the o ring on it. if that doesnt work THEN you use teflon or get better oil/lube

**crazycupcake** · July 20th, 09:40 PM

oil wont work, i tried it before the taflon. but yeah, you can try that maybe it'll work for you... it just didnt for me,

**SEFishy** · July 21st, 09:50 AM

also make sure u have the o ring in teh lpc

**PMIKID** · July 21st, 01:28 PM

ya thanks alot guys it doesnt leak anymore... all i had to do was oil it

Thread Tools

View more Paintball photos