Thread Tools

**paintballer1134** · November 4th, 04:28 PM

ok i have a piranha ext pro g3 with e-force trigger,smartparts tear drop silver and evil bolt. i want this gun to be able to keep up with this kid that i play with he always rents an impy and is cocky so i wonna be able to rock him. what upgrades would u suggest if you can tell me what it, is the price, and the color try and keep it in the silver/purple range cause thats the fade on my gun.

**big_balla** · November 4th, 04:33 PM

Well, aftermarket barrel, cp or jj (If you have money buy a kit,) Air tank (45/45,) Halo B. But if you really want to "rock him" then practice, get good, and you'll kick his ass with a stock fishy, and that'll be worse than "getting rocked" by a kid with an upgraded piranha.

**paintballer1134** · November 4th, 04:37 PM

sounds good with the hpa i know that i should get fiber wrapped is there a like super uber hpa tank maker?

**big_balla** · November 4th, 04:56 PM

Well, no, there isn't a "super urber hpa tank maker." If you want to fork out the green, you could get an Angel Air System. But you can get hpa from anybody, really, as long as you have a reg. I seriously recommend a new hopper, though. You should easily be able to outshoot a gravity feed. 12 volt revvy should be fine.

**paintballer1134** · November 4th, 05:59 PM

so if the next to things i was gonna get were a reg,hopper,tank u say get them in the order hopper,reg,tank

**SEFishy** · November 4th, 07:37 PM

guess ill help u again, i like the cp, topedo, and palmer regs. the reloader is fine, an egg is some over kill but its nice to have if u get a better gun down teh road. i dont care for 45/45 to small. look for crossmann, nirtroduck, and pure energy for some decent 68/4500 tanks. the teardrop is fine unless u want a barrel kit

***onesikpup*** · November 4th, 07:52 PM

^^^^ wut he said. plus, if you want a little more "fine tuming"....get a pmi turbo valve (or an AKA tornado valve, after you get hpa). also, it couldnt hurt to get a spring kit after you get a regulator. something else you might look into, a new trigger (not trigger frame). the boss blade trigger is pretty comfy for most people.

**joeyk803c** · November 4th, 09:39 PM

oh, a barrel kit, lighter hammer, high flow valve, better bolt, blade trigger, and a new board(if possible)

***onesikpup*** · November 4th, 10:32 PM

new board= not possible, you would have to get a whole new frame (the evo frame).

lighter hammer= not likely. i bought a lighter hammer, gave me more problems and caused my marker to not even work, lucky for me they let me return it. fish valves require a heavy hammer.

**Brockocoli** · November 5th, 08:24 AM

crossfire makes really good tanks and so does PMI...as for a hopper...a Halo TSA is good for the Piranha or a 12 volt revvy...a halo won't fit in the feed neck i dont think

**joeyk803c** · November 6th, 05:21 PM

A lighter hammer requires a high flowing valve. That is why I added another valve to the list. Also a new board is probable, the Morlock board.

**paintballer1134** · November 6th, 06:02 PM

ok so heres the deal probably getting
cp reg-like 60.00
68/45 PMI fiber wrapped tank-200.00
halo-110

total $370

***onesikpup*** · November 6th, 06:34 PM

Quote:

Originally Posted by joeyk803c

A lighter hammer requires a high flowing valve. That is why I added another valve to the list. Also a new board is probable, the Morlock board.

there are no boards available for the piranha. not one single spyder board will work. they are mounted under the grip panel, whereas a piranha is mounted above the trigger in front of the sear. (*unless someone came out with one in the last couple weeks)

as far as a lighter hammer, and needing a higher flow valve.....this combination does not work well with a piranha. believe me when i tell you that i have all these things, and a high flow pin too. it does not work, plain and simple. every aftermarket hammer i have tried to use in a piranha wont work because of a minute difference in where the sear catches it. most times it will just lock in place once you force it to cock. there may be one out there that will work, but i havnt found it yet and neither has any other piranha owner here or pbnation or a few other websites that i cant mention. it is recommended that you just use the original, it works best.

[/rant]

those are some nice ups

**joeyk803c** · November 7th, 07:56 PM

True, but I have heard the Dark Horizons hammer does work with some modification.

The Morlock board can fit any marker, including a Piranha but it is pricey.

**SEFishy** · November 7th, 08:31 PM

a halo is still bit of an over kill

***onesikpup*** · November 7th, 08:48 PM

i almost sent the dark horizon hammer to a machine shop to have the problem corrected. but instead i decided to e fight with most of the people at dark horizons, and the end result was that they almost demanded that i return it. i really pissed them off. but it would have worked if i had the thing modded, but who really wants to have a $60 hammer that allegedly should work modified for about the same price that it cost in the first place....that would be more money than i paid for the marker in the first place.

i'd like you to introduce me to someone who has installed the morlock board in their fish and has proof. i dont think there is such a person.

edit- i have a halo w/zcode. couldnt turn it down. used once, $55 shipped.

**Tex** · November 8th, 10:00 AM

Morlock wont fit. Not enough room in the frame. I almost made my own board using a basic stamp ic, but couldnt really justify the expense.

**paintballer1134** · November 8th, 01:44 PM

very interested in the halo pm me and we will talk.

***onesikpup*** · November 8th, 07:47 PM

halo isnt for sale....sorry bout the misunderstanding. it was a long sunday for me, i was tired when i wrote that. i was high siding on the fact i bought one for that cheap.

**paintballer1134** · November 8th, 08:14 PM

crap i thought i had strck gold. where did u buy it if u cant say pm it to me, inless u bought it from dude thats doesnt have anymore.