Quote:
|
Originally Posted by counterstrike53
Thats kinda gay that you have to take out the sleeve just to get to the poppet. If I dont lube mine every 3rd or 4th case i start getting major FSDO, inconsistency, and shootdown. Buts its no big deal for me because I have an Abomb (gen 3). So i can imagine that the empire is a little harder to keep up.
Decent review
and btw, where the hell do you get dow 55? i can't find it anywhere, so i've been using microlon assembly grease on my timmy, which is barely a step above shocker grease. And isn't the bolt made of delrin? Why would you put anything on it, unless your getting serious amounts of friction, but on most timmies i've handled, the bolt is so frictionless that when its not aired up it just falls back and forth as you tilt the gun.
btw, you might not wanna take off your front orings. It will slightly affect your effeciency and moderately affect your consistency. As long as thoes stock detents are cheap, im leaving my orings on.
|
You don't have to take the ram sleeve out. You just pop off the front block and unscrew a cap. Same as the older Timmies except for the cap.
www.paintballer187.com for dow 55.
Tri-flow is for the o-rings.
The affects on the consistancy and efficiency are barely noticeable.
Empire II Intimidator
