Thread Tools

ionfreak111 · June 2nd, 01:20 PM

I got the stock lid off then i screwed it all back together and it is not clicking on like it said on the internet. it didnt come with any instructions.

**big_balla** · June 2nd, 02:08 PM

Push harder.

ionfreak111 · June 2nd, 02:39 PM

no dude pushing harder wont make a diffrence i got a ruber mallet and tapped it pirrty hard its not that its too tight fot the hopper it is too big for it it fits al the way around the mouth with space in between.

**big_balla** · June 2nd, 02:59 PM

Did you get an actual speedfeed or some look-alike? I know that some wannabe speedfeeds you need to get the duct tape out and just put enough on so it's snug.

ionfreak111 · June 2nd, 03:06 PM

no dude i got a lagit one it is this http://www.paintballshop24.de/images...ages/522_0.jpg yea it is too big i got it from action village.com should i send it back i am pritty sure it is too big

**big_balla** · June 2nd, 03:12 PM

Are you sure you ordered a halo/reloader speedfeed? I think they started making them for vlocity's as well.

But yeah, calling them/sending it back would be your best bet unless you don't mind rigging it on.

ionfreak111 · June 2nd, 03:14 PM

yea i am... that is so wierd i wounder if my halo b came with a diffrent shell then it was supposed too because i just tried it on my halo TSA and it fit... hmmmm that is so wierd what do u think i am going to take a picture of it and i will send it here brb in 5 min

ionfreak111 · June 2nd, 03:39 PM

i dont know how to put pictures into here

ionfreak111 · June 2nd, 03:44 PM

do the red smoke halo's have a diffrent shell because thats what i have

ionfreak111 · June 2nd, 03:44 PM

Could it be that when i unscrewed it too take the stock out that i screwed it on too tight?

ionfreak111 · June 2nd, 03:47 PM

this is what i bought exactly and from same store and same color. Paintball, Skateboard, Airsoft, Apparel and Snowboard Gear at ActionVillage.com

**big_balla** · June 2nd, 11:14 PM

Quote:

Originally Posted by ionfreak111

Could it be that when i unscrewed it too take the stock out that i screwed it on too tight?

Yes.

ionfreak111 · June 2nd, 11:30 PM

nope doesnt work at all and now i accadentally pinched my battery wires in the shell

***YouCantSeeMee*** · June 5th, 10:44 AM

It might be a shorted circuit in the board. I have a similar problem. I just got a Halo B, and when I turn it on, the green light blinks, and the motor only whirrs and spins to feed when the lid is tapped with a screwdriver or something relatively hard. Are Halo B's motion activated? By that I mean do they feed only when you shoot? Sorry for asking this in your thread, but I didn't want to start another just for that. Somebody please PM me with help. Thanks.

**big_balla** · June 5th, 11:57 AM

Your problem isn't like his at all. But yes, halo's use eyes, which detect if there is something in the breach of the hopper. If you take apart your shells you can see two wires that go into the neck. Those are the eyes and when there's nothing between them, the drive cone spins.

***YouCantSeeMee*** · June 5th, 12:02 PM

But that's the problem. It doesn't even spin when there's paintballs in there. I put paint in it, and turn it on, and it will only feed when I hit the feed neck or lid of it with the palm of my hand. WTH?

**big_balla** · June 5th, 12:04 PM

Then you got a reloader b, which is sound activated, and much better, IMO.

***YouCantSeeMee*** · June 5th, 12:06 PM

Really? Cool. So it will only feed the balls when I shoot? Pretty cool. But is thegreen light supposed to blink, or is it supposed to be solid green?

***YouCantSeeMee*** · June 5th, 12:15 PM

Yes, it is a Reloader 2. I google imaged the Empire Reloader 2, and it pulled up the exact picture of my hopper. How much better on a scale of 1 to 10 is the Reloader 2 than the Halo B.

**big_balla** · June 5th, 12:20 PM

Reloader 2 is not at all better than a Halo B. I was thinking you had a Reloader B.