Cockerkid63

My gun is fine when i shoot like one shot at a time. (B2k4 PDS CHAOS BOARD SHOCKTECH SUPERFLY BOLT) But when i walk it, my balls drop and the pressure stays at like 100 and is so slow to return to 300. I dont know whats wrong with it. I think its the reg but im not %100 on it. I think im gonna get a new reg. Like a CP or Gladiator or Sidewinder. Whatever, just someone help me fix it before i get a new one. Because im not getting a new reg anytime soon.

__________________

Koval15

its the reg. Thats the first thing i upgraded on my gun cause it was a mess of problems. Just find a used reg for like 35 like i did.

__________________

2005 Vision Shocker- Predator 5.0 Board, Break Beam Lazer Eyes, Redz Pepper Stickz Barrel Kit, New Designs Floating Bolt Guide, Sidewinder Regulator,15 Degree Hybrid ASA with gauge, Q-Lock Feedneck, Red Q-Lock Latch, Red Eye Cover, Custom Products Trigger, Dye Sticky 3 Grips, New Designs Bolt Kit, New Designs Detent, Powerlite Rail, and KAPP On/Off.

Cockerkid63

Like, do you still have your stock reg? Because on the very bottom of mine, theirs a little swivvle thing that i can take off. And when i take that off, 2 things fell out, a clear circle thing and a metal gold colored thing, now i dont know where to put them.

__________________

jaggy13

cockerkid, you are describing shoot down. basicly an air restriction issue. this could be caused by a few things.
1. on/off is not all the way on or is on too far. (if you have an on/off)
2. the reg may be dirty and require clean/lube.
3. the reg is damaged and the spring is "hanging" on the body. (older torpedo's had this problem because the spring was very sharp at the end and would scar the body fo the reg on the inside.)

Sounds to me like #2 is your issue. if it was working and this problem just came up try that.

as for assebling your reg, if its a stock reg, download a manual and look at the exploded view of the parts diagram.

__________________
MY FEEDBACK


1 cheap ION and one not so cheap ION

Don't Get Scammed! Use My 3rd Party Service!

keaneabis

i have the exact same problem as cocker kid, although i've cleaned many times. i haven't lubed because i haven't gotten the right kind of lube.

a: would it still be shooting down because of the lack of lube?
b: could i lube the reg with oil as opposed to the recommended silicon?
c: could you recommend a good reg for less than 50, but if it's necessary i could go higher

bobide

bob long torpedo. It's cheap, and fairly consistant. Not that huge a step up, but may help.

GET SOME DOW33!!!

__________________
05 PROMASTER , 14" Macdev Matchstick, Kila Drive, Zentriam Valve, ICDU ram, CCM no-rise, Sonic lpr

dshiznit

i know what it is its one of the little rubber seats, the round one that is flat one one side and one the other side it has a little raised cylinder type thing the raised side has to go up this solved this problem for me; that is if its stock if you look at the manual here-> http://www.icdpaintball.com/icd05/pd...uals/04BKO.pdf its the little piece right below the second piece of the reg body

sNoW PIrAnHa

Gladiator, so simple and easy to maintain, get it.

__________________
"I have no mercy or compassion in me for a society that will crush people, and then penalize them for not being able to stand up to the weight"- Malcom X

Cockerkid63

You guys this thread is so old. I have a sidewinder now.

__________________