Ryan_Page

Okay, got the B2K4 in the mail on thursday, went in friday night and got the bottomline set up, gassed up my hpa for today, and guess what? Didn't cock when I screwed it in!

I adjusted the HPR to the right psi, then wento to adjust the LPR to make it cock and operate at the right psi, figured it wasn't putting enough air pressure in to cock it. Turn it in, the solenoid starts to leak, no cocking of the bolt, I screw it back out and think, so I try again, this time, going a fill turn past where it starts to leak, THEN the bolt cocks, but still leaking, and not cycling right.

Does anybody know at which point something is going wrong with this? I'm new to B2K's, but I know this ain't right.

__________________

Cockerkid63

Turn your LPR clockwise untill you hear leaking, then turn it counter-clockwise 1/4th inch. See if that helps.

__________________

bobide

I always see this problem. Try raising the hpr a bit more and do the lpr again.

__________________
05 PROMASTER , 14" Macdev Matchstick, Kila Drive, Zentriam Valve, ICDU ram, CCM no-rise, Sonic lpr

Ryan_Page

Cockerkid63: It doesent cock until a full turn AFTER it starts to leak, read my 1st post again. I knew to do that, it said it in the manual, and I knew a better way to do it from the IcDOG site. But the problem is that that leaking is starting too early.

bobide: I did, I had it up to 400 psi, still nothing, put it down too 300psi thinking maybe it's not cycling cause of the overloaded pressure, so I turned it down, and started cranking up the lpr, still same problem.

__________________

Cockerkid63

Rotated valve? Check your valve, i had the same problem, see if the screw that holds the valve in place isnt in the hole of the valve, there is a little indent on the oppisite side of the valve (not a hole) make sure the screw is in the detent. Then see.

__________________

Ryan_Page

Crap, you posted a bit too late, late afternoon I brought it to the shop for them to see what's wrong. Crap. I'll see if you were right tomorrow though.

__________________

Cockerkid63

My shop knows 0 about b2k4's. In fact, any ICD product. All they care about are ions. Hope your shop fixes it, but check your valve when you get it back.

__________________

Ryan_Page

Yeah, they know nothing about ICD either. But this one guy who works there at random times was there, and he knows a little about 'em, so he's the one taking a look.

__________________

anxiouspaintblr

where abouts do you live in canada? If you live in the GTA (hamilton, st catherines, toronto) then i can meet you somewhere and fix it for you, their simple guns, but people do have problems out of the box like yourself. Have you taken the gun apart? I've heard of cases when people have metal shavings in their lpr's. uhhh if you've never heard of those cities....add me to msn and I can probably help you out, insert_name_123@hotmail.com

did you pick it up from canadianpaintball.com?

edit, nvm, i see where you from (may be part of the prob ....j/k man) I'll add you to msn and we'll fix'er up.

Ryan_Page

Yeah, I got it from Cdnpb.com, never buying from them again. Add my new email, the.paintballer@hotmail.com

__________________