Thread Tools

**pimpinp8ntballa** · November 22nd, 08:18 PM

I was ermm.. trying to adjust my trigger...and it locked up. on my 04 b2k. i took it apart a little, but im fraid illl kill the wiring harness... so help. Help.

**Sham3d** · November 22nd, 08:20 PM

Hit it with a hammer

Is it on your ICD?

**pimpinp8ntballa** · November 22nd, 09:02 PM

Boooooooooooooooooobiiiiiiiiiiiiiiiiiiiiiiideeeee Heeeellp Meeeee!!!!!!!!!!!!!!!!!!!!!!

**bobide** · November 22nd, 09:25 PM

Quote:

Originally Posted by Jester of Paint

ask bobide damnit

u know u are responsible for like 1/3 of my pm's now?

I barely remembered the problem u might have. I remember now that the activation screw when too long can actually never release the switch. Either breaking it, or not allowing the gun to fire. I'm pm'd u back, sry i can't be more help. Remembered a good ICD specific online store.

that would be shoot paint (1 word) that got blocked

http://www.**********.com/catalog/pr...c367a2b89e7c96

be sure to test the switch to make sure it's really dead before getting a new one and sodering stuff.

***martix_agent*** · November 22nd, 09:29 PM

could you be more specefic? the trigger locked up could mean a lot of things. does the trigger not move? does the board lock up? you need to elaborate

**pimpinp8ntballa** · November 23rd, 10:57 AM

Elaboration: The trigger moves, but only slightly. It is stuck in the forwar (ready to fire) Position. The LED does not come on AT ALL. I thought i mite have a battery problem. If this isnt a fix someone who is pretty electronicly illiterate cant do, tell me, cuz my local proshop owner is like the ICD master... hes got some sick BKOs in his shop... neway, i can take it to him with confidence if its not an easy fix.

**bobide** · November 23rd, 11:44 AM

well if he's a master then i'd definitly have him do a install for the switch. I have no idea why the trigger won't swing at all. If the spring was missing it would still move, are any of ur set screws really long, preventing it from moving?

**pimpinp8ntballa** · November 23rd, 11:54 AM

no, th trigger move, but only very slightly. I cant see any screw stopping it, but i was messing withe screw when it decided to goe Pthhht.... But you think i should just take to Him and say "Barry, fix it." or not... cuz hes really spensive if hes not drunk...

***kamikazikillah*** · November 25th, 05:21 PM

not sure on a 04 but my friend had a b2k2 and he crushed the board by over tightening his adjustment screw and it locked up. not sure if it is the same though. good luck

**pimpinp8ntballa** · November 25th, 05:26 PM

Quote:

Originally Posted by kamikazikillah

not sure on a 04 but my friend had a b2k2 and he crushed the board by over tightening his adjustment screw and it locked up. not sure if it is the same though. good luck

i was loosening at the time. i think. it all runs together.... but i was supposed to be loosening.

***O-Dawg*** · November 26th, 12:08 PM

You could have crushed the board and you will probably need to take it to your local shop if they have boards or if they can fix it...it happened to mine and I had to send it back to ICD tolk like a month till they actually got around to it..

**bobide** · November 26th, 02:05 PM

if it's the board screw having ICD replace it. Just buy chaos board and u'll be happier. It's much faster and the money it would have cost to ship it would cover like half the board's price.

**skateandpaint** · November 27th, 11:44 AM

back out the top screw

ur trigger is 2 far foward the top screw will help theat

pm me i have the same gun

**pimpinp8ntballa** · November 29th, 08:23 PM

I fixed it. You know how i fixed it? i backed out a screw. You know why that screw was in so far? Because im a retard >.<

**sNoW PIrAnHa** · November 29th, 09:31 PM

Quote:

Originally Posted by pimpinp8ntballa

I fixed it. You know how i fixed it? i backed out a screw. You know why that screw was in so far? Because im a retard >.<

Wow you wasted bandwidth on a thread when you could've just backed out the screw.

**counterstrike53** · November 30th, 06:35 PM

Quote:

Originally Posted by pimpinp8ntballa

I fixed it. You know how i fixed it? i backed out a screw. You know why that screw was in so far? Because im a retard >.<

wait, i thought you said that it was stuck forward?

why didn't you try backing it out before?

***martix_agent*** · November 30th, 07:57 PM

Quote:

Originally Posted by pimpinp8ntballa

Because im a retard.

that's why

**kant_think** · December 1st, 09:09 AM

it makes me sad seeing as how pbf is gonna end like this

**pimpinp8ntballa** · December 1st, 03:29 PM

Quote:

Originally Posted by counterstrike53

wait, i thought you said that it was stuck forward?

why didn't you try backing it out before?

It was stuck forward. the screw that depresses the microswitch was so far in it did not allow the trigger to travel.

**pimpinp8ntballa** · December 1st, 03:30 PM

Quote:

Originally Posted by sNoW PIrAnHa

Wow you wasted bandwidth on a thread when you could've just backed out the screw.

If you think im wasting bandwidth, look at all the "Ion vs B2K" threads.