Thread Tools

**EverybodiesGuy** · February 18th, 11:25 PM

i already referred to the faq

well, today was the first time airing it, it worked fine until i wanted to oil the internals, i put aci airlub in the fitting connected to the reg, reconnected the macroline, put my tank in, shot maybe 3 shots and after that the bolt wouldn't cock back, it was as if there was no air in it at all, but there was still alot of pressure in the drop forward...i didn't adjust anything, i didn't change anything i just aired it up and thats it

bgbubba · February 19th, 11:38 AM

Have you tried to adjust your lpr yet?

**EverybodiesGuy** · February 19th, 12:25 PM

i didn't want to tamper with the lpr and i realized the air wasn't going past the reg so i adjusted the screw on it, it ends up cocking back but it leaks out from where the reg connects to the asa, this morning i forgot that yesterday i messed around with the same screw not knowing what i was doing, i didn't know it adjusted something

bgbubba · February 19th, 12:34 PM

You may need a new o-ring on the reg, but first see if the reg is screwd in all the way.

**EverybodiesGuy** · February 19th, 01:01 PM

well, it works now, but its odd, sometimes when i gas it up it works fine, but sometimes it leaks...its odd

bgbubba · February 19th, 03:14 PM

where is it leaking from?

**EverybodiesGuy** · February 19th, 03:26 PM

where the reg connects to the asa, the o-rings in the reg are perfect, thats why its odd it doesn't seem like it should leak

**Ryan_Page** · February 19th, 06:17 PM

Lube the regs up if it happens again, and if it still leaks, replace the o-ring anyways.

Thread Tools

View more Paintball photos