EverybodiesGuy

well, the day started out rough seeing that the bolt wouldn't cock back, then the reg leaked...i still can't figure out why it did't cock back but it does that from time to time...its random, and well i changed the reg o-ring and it stopped leaking at the seam but still wasted quite a bit of time, after that rocky portion of the day, i fell in love with the thing...gohll, the only thing i regret is getting a freak barrel for my a/c and putting it on my b2k...freaks are absolute trash, my front tilts to the side when connected to the back and well sometimes paint just goes flying in all directions...oh then when i ran out of air, i re aired it and it started leaking out of the barrel quite a bit...then it just stopped, again another random thing that just happens and disappears, after that blew over... it was secks again...overall i love it, just in dire need of a stiffi barrel

1 question, whats up with the random problems like the bolt not cocking back or the barrel leak, i probably spent 2 hours walking back and forth from locker to field over and over again

__________________
Jesus loves me...he loves me a bunch, becuz he puts skippy in my lunch

it shall set you free

ICD owner #84

Ryan_Page

Well, the abrrel leak could be a bad seal around the valve, check out the o-ring there, and check to see the cupseal is in right, too.

The bolt not cocking back would be because your lpr is poorly tuned probably, or needs breaking in. I suggest new regs and valve anyways. Ebay valve for $17 with free shipping, can't beat that.

__________________

bobide

heheh, yeah cockback is a big issue w/ b2ks, other then that you don't get many problems. Try a bump up on the lpr. As for the barrel leak odds are you just needed to pull the bolt back, if you ever break it down all the way give the cup seal a quick look.

__________________
05 PROMASTER , 14" Macdev Matchstick, Kila Drive, Zentriam Valve, ICDU ram, CCM no-rise, Sonic lpr