Thread Tools

paintball_601 · March 27th, 04:23 PM

i have a stock promaster, and 80$....any suggested ups?

**Tim-Tim** · March 27th, 05:29 PM

Grips, clamping feedneck. Or a stiffi/ultralite barrel.

**sNoW PIrAnHa** · March 27th, 08:09 PM

Grips and bolt are the least needed. Clamping feedneck and a new barrel, then new regs. Possibly a better ASA and trigger. But barrel and feedneck first.

**pballa12** · March 27th, 08:10 PM

get a UL barrel

***117*** · March 28th, 07:04 AM

cp reg

paintball_601 · March 28th, 06:07 PM

cp regs are hardly better than stock....when i get new reg is going to be top grade(evolve Pi, or an AKA)

**Tim-Tim** · March 28th, 06:14 PM

CP regs are up there with the AKA and evolve. Not barley better than stock.

***keaneabis*** · March 29th, 08:06 PM

CP regs are great. stock promasters need barrels and triggers before regs. grips are good, board is great, bolt has always been great, and I think feednecks are a waste of money, just put a bit of masking tape in there, i've never dropped my evo doing that, and i play front.

**sNoW PIrAnHa** · March 29th, 09:01 PM

Quote:

Originally Posted by keaneabis

CP regs are great. stock promasters need barrels and triggers before regs. grips are good, board is great, bolt has always been great, and I think feednecks are a waste of money, just put a bit of masking tape in there, i've never dropped my evo doing that, and i play front.

I've dropped evos out of anything. The tightest CCM, and the loosest high rise.

Hell my halo even comes out.

When I tighten it, I really ****ing tighten it. If you're actually gonna play front and dive and slide and hit ground hard, you need a good feedneck. I crank in my CCM so its virtually impossible to move. My hopper never comes off or rotates the slightest bit.

The stock feedneck is ****, a clamping no rise is definitely needed.

**bobide** · March 29th, 09:06 PM

cp regs aren't the greatest. Stop kidding yourselves. They are good for the price. But if you want real preformance you go to AKA or Evolve.

If you are having poor consistancy get a reg.

bad efficancy? New empire valve is out.

if everything is just great, get a barrel. Hell, if you buy one that isn't overpriced (like the ultralight is) you might even be able to buy the ccm feedneck too.

***keaneabis*** · March 30th, 04:06 PM

Quote:

Originally Posted by bobide

cp regs aren't the greatest. Stop kidding yourselves. They are good for the price. But if you want real preformance you go to AKA or Evolve.

If you are having poor consistancy get a reg.

bad efficancy? New empire valve is out.

if everything is just great, get a barrel. Hell, if you buy one that isn't overpriced (like the ultralight is) you might even be able to buy the ccm feedneck too.

CP regs definately aren't the greatest, you're right. I just said they were great. They are.

as far as barrel's go with 80 dollars i'd get a freak junior kit, my old teardrop never worked well with small bore balls, and those are supposed to be some of the best barrels for bushmasters.

and snow, you're slamming the feedneck because you're comparing it to clamping ones. it doesn't really have any intended protection against hoppers falling out. that was just preference though, have you tried evos with masking tape and a non-clamping? i'm telling you, i've never dropped a full evo once. And yes, i dive and slide etc.

FiremanMike · April 25th, 06:55 PM

$80 = CP trigger and a nice feedneck, thats my vote..

***ImP RiPpEr1988*** · April 26th, 08:59 AM

a gladiator would look hot on a promaster, along with a matchstick.

**20bps_tes** · April 26th, 11:54 AM

cp 14" and a ccm no rise = money well spent

**HomE SkiLLeT** · April 26th, 01:51 PM

CP 2 piece and feedneck.

**Alexmo123** · May 2nd, 11:28 PM

i vote an empire 4 piece kit and either a trigger and no rise.
Then later valve and reg

Thread Tools

View more Paintball photos