enraged_b2k4

Would a high pressure tank be a bad idea on a stock b2k4?

__________________

mLuH

nope.

__________________
Thanx A LOT Predator14

Buy my stock NXT
http://www.paintballforum.com/electr...ml#post2027536

enraged_b2k4

ok. good but that doesnt change the fact that my solenoid is leaking and I have to send it back.

__________________

Jester of Paint

its leaking cause u have to turn ur lpr down

__________________
-Nick
*Beware of Renton Washington*

enraged_b2k4

how do I turn that down?

__________________

lbreevesii

if you are looking at the lpr from the barrel end you turn the screw/knob counterclockwise. The general rule of thumb for proper lpr setting is to turn it all the way down to where the gun won't cycle, then slowly turn it up until it will fully cycle and then give it an extra 1/4 to 1/2 turn past that point.

If your selenoid leaks at that point I would make sure that the selenoid retaining screws(the two that hold it to the ram) are tight.

__________________
member of the COG, TOG, ICDOG, SPOG, IONOG, member #'s 25, 80, 19, 7, and 7.
Founder/Prez of PBA

VIVA LA FIKI!!