Thread Tools

bgbubba · July 19th, 10:21 PM

Well, i havent been on in a while, just last week my b2k4 had some problem after a couple months of hard playing, btw i bought it used. Well long story short the gun is cocking, holding charge, recocking, but not fireing. I behlive something is rong with the hpr, lpr or the ole chaos valve. If you know how to fix this, or what to do please get back to me

**Jester of Paint** · July 20th, 10:53 AM

turn ur hpr to like 225 and then turn ur lpr down and then slowly turn ur lpr up until ur bolt cocks and cycles

bgbubba · July 20th, 11:22 AM

I dont behlive that is the problem, but i will give it a try.

bgbubba · July 20th, 12:05 PM

well that did not work, Like i said the gun recocks but dose not fire, it tries to fire bt very little air comes out, barley shooting the ball out the barrel

**Jester of Paint** · July 20th, 12:52 PM

try a new battery

**bobide** · July 20th, 07:32 PM

what do you mean by "holding charge"

**toXic** · July 20th, 08:08 PM

I think it means its holding the air....

But your having problems, so why the : )?

bgbubba · July 20th, 09:53 PM

well, its mosley sarcasem...

***Demented*** · July 22nd, 08:01 PM

If the bolt is cocking back, staying back, and regs are set, you have 1 or more of the following problems.

1)The trigger set screw is not activating the micro switch.
2)The set screw is continuously activating the micro switch.
3)You have a bad batery.
4)The board has become unpluged or is plugged in backwards.
5)Wires from the micro switch or to the noid may have been pulled.
6)Your gun isn't turned on.

bgbubba · July 22nd, 11:23 PM

i guess you didnt read closley enought, the gun trys to fire but dosent, like all it does when i pull the trigger is the bolt goes forward and comes back, it shoots the paintball, about 3 inches. and yes i have turned up the lpr, velocity and things like that, and nada

***Demented*** · July 23rd, 12:39 AM

If that's the case, your bolt could be upside down, still, the batery could be bad, or your pull pin could be infront or behind the hammer slot,

**sNoW PIrAnHa** · July 23rd, 12:29 PM

Sounds like your valve is in backwards or your spring is way too heavy. Check out your ram, clean and lube it.

bgbubba · July 23rd, 12:30 PM

you act as if i am a idiot, well i know what i am doing when it comes to taking it apart and buying new batteries, but this problem i have never had befor with any of my markers.

bgbubba · July 23rd, 12:32 PM

Quote:

Originally Posted by sNoW PIrAnHa

Sounds like your valve is in backwards or your spring is way too heavy. Check out your ram, clean and lube it.

nope. Ive tried it, vave is not backwards cause it was working fine untill a few weeks ago.

**toXic** · July 23rd, 01:25 PM

Quote:

Originally Posted by bgbubba

you act as if i am a idiot, well i know what i am doing when it comes to taking it apart and buying new batteries, but this problem i have never had befor with any of my markers.

Lighten up, everybody is just trying to help you.

***Demented*** · July 23rd, 02:12 PM

Quote:

Originally Posted by bgbubba

nope. Ive tried it, vave is not backwards cause it was working fine untill a few weeks ago.

Have you taken your valve out since then?

Valves can twist in their place if the set screw is too loose.

bgbubba · July 23rd, 08:14 PM

ill try that, didnt think about it. ill get back to you tomarrow

bgbubba · July 24th, 09:57 PM

lol, i took it completely apart lubed slapt her back to geather had the same problems, so in my frustrasion i started fireing it as fast as i could because it was only makeing a low pumping sound when i was fireing it and within 20 seconds it was sounding normal. im going to take it down to the local field and get it chroned. befor i play ima take it apart one more time and make shure there is nothing loose inside. This is the wierdest case i have ever seen has this happend to any one. I still dont know what was rong with it. btw this was my second time to take it completely apart nd put back togeather when the problemed first occured.