Thread Tools

jackel26 · November 14th, 10:57 PM

My b2k4 will not take air threw the gun. It was leaking out of the reg adjuster and velovity adjuster but now it wont even cock the superfly bolt. Wuts the deal with that. Greatly appreciate all help.

**kenny_1491** · November 15th, 02:30 AM

your detents could be in to far(idk if it can happen on a b2k but it can on an impy) toher then that are you sure you have air in your tank?

***Demented*** · November 15th, 02:54 PM

Detents have nothign to do with it. If it's leaking out of the reg adjuster, wrap some teflon tape around the threads.

jackel26 · November 15th, 09:53 PM

i did that. and it does have air because my guage says 2500 psi and i shot about 150 balls before it siezed up. it was shotting normal and slowly lost power until no air at all will go thru

**jaggy13** · November 16th, 01:51 AM

Quote:

Originally Posted by jackel26

it was shotting normal and slowly lost power until no air at all will go thru

Do you have an on/off asa on the marker?

**kenny_1491** · November 16th, 01:57 AM

Quote:

Originally Posted by Demented

Detents have nothign to do with it. If it's leaking out of the reg adjuster, wrap some teflon tape around the threads.

i was referring to the bolt not cocking problem, my dads detent screws were screwed in to far and it grabbed the bolt holding it in the uncocked position.

***Demented*** · November 16th, 02:21 PM

Quote:

Originally Posted by kenny_1491

i was referring to the bolt not cocking problem, my dads detent screws were screwed in to far and it grabbed the bolt holding it in the uncocked position.

As was I. ICD uses an o-ring system for detents.

I'de advise not speaking if you nothing of the subject.

Thread Tools

View more Paintball photos