Thread Tools

**huntingismylife** · July 6th, 08:32 PM

OK, my *new* BKO will not shoot. 0? It was leakin really bad so i tried to take it apart to fix it but i didnt have all the alen wrenches so i couldnt take it all the way apart. I put it back together and gassed it up. It wasnt leaking nemore but wen i pull the trigger it wont do jack! If i push the bolt forward air comes thru and it shoots. I dont have the pressure up to high because the high and low pressure regulators turned almost turned all the way out. Sometimes it will shoot a little bit wen i pull the trigger but then it stops.

thanks for your help guys

**Roobvandam** · July 6th, 08:53 PM

i don't want to be rude or anything but:

do you have a battery in it?
is it on?

if yes, put a new battery in there.

if that doesn't work, take it to your local shop, have them fix it.

**huntingismylife** · July 6th, 09:28 PM

hahahaha yeh it has a battery in it. Im stupid, but i would have to take my other gun and shoot myself a couple times if I went thru all that and I didnt have a battery in it.

The guy that runs the field I play at says it has an internal gun malfunction. That gun has been nothing but trouble since i bought it though. It leaked the first time I used it and it hasnt worked right since that day.

**sakurai** · July 7th, 11:55 AM

Talk to ICD. Get something from them.Or return the gun and get a new one. unless you or someone can fix it. Also check if the trigger is hitting the macroswitch and all your wiring and electronics are connected.

**sNoW PIrAnHa** · July 7th, 12:12 PM

happened to me, its the wiring, me and my dad rewired my gun and it worked fine. I used to have to hit it with my fist to get it to shoot one ball. Also if its still leaking check the solenoid, take it apart and oil all the orings and the gasket.

**Zeotranatix** · July 7th, 03:19 PM

the bolt
it might be upside down ...

BushmasterMAN · July 7th, 06:22 PM

ya...i accidentally put the bolt upside down after i cleaned it once...and it made it not fire...

**sakurai** · July 7th, 07:00 PM

same here...... i felt dumb once i realized

BushmasterMAN · July 7th, 07:02 PM

i ahte when stuff like that happens in front of people cause i was at a shop and the guy was like:man the bolt is in upside-down... and i got soem looks from ppl like wat an idiot...

**huntingismylife** · July 7th, 09:24 PM

the bolt's not upside down. but im taking it back to the store i got it at so they can check the wiring and if they can't fix it then they are going to give me another one... hopefully....

BushmasterMAN · July 7th, 09:36 PM

good call...always take it to the store if you dont hav a clue about what the hell is wrong...

**huntingismylife** · July 7th, 09:42 PM

or a clue what im doin on this gun... im just used to spyders, iv been shooting them all my life, i dont no how to fix these YET

**Carmas** · July 8th, 08:16 AM

i hate taking it to a store, i love opening up my gun and all that junk... But iv broken stuff so yeah take it to the store. heh

SpYder craZy · July 8th, 10:25 AM

just take it back and hope they give you a new one

**huntingismylife** · July 8th, 06:49 PM

hey snow piranha what am i lookin for when i look at the wiring?

**huntingismylife** · July 9th, 08:24 PM

ok well i took it back today. They have to keep it over night and perform open heart surgery on it

my poor baby

**Big Weapons** · July 9th, 08:59 PM

Don't worry =P

More than likely it probably just a pressure related issue.

**chronic** · July 10th, 11:58 PM

hmmm problems like these happened to mine...

What I did was screw the LPR screw into the gun until it leaked... then unscrewed it right until it stopped.... now it works great... and my BKO is running around... 275-300... try to get in that area.

**huntingismylife** · July 12th, 03:56 PM

Well the weird thing was no matter what I did to turn up or turn down the psi the gauge wouldnt do anything. But when it was working i had it running at 300.

**sNoW PIrAnHa** · July 12th, 04:14 PM

Quote:

Originally Posted by huntingismylife

hey snow piranha what am i lookin for when i look at the wiring?

I dunno its hard to tell. You wanna look for where the wire isn't covered by the rubber thing that goes around it (the metal part) and see if thats touching something that conducts electricity. I remember it was around my switch and it always touched the metal on the tray. So thats the kind of stuff you want to look for. Also check your wiring harness around the board. maybe its plugged in upsidedown or something.