Mangobutter

ok im seriously consitering buying one and i was just woundering about the mantince, is there any timeing can you field strip it??? thanks

__________________

elementboarder5

there is very little maintenence. The only thing i would do is lube the ram.. and regs... the normal stuff. Also, when you first get it, take off the tray carefully. Now, there will be 4 screws that u see on the solenoid (the only screws u can see is teh ones im talking about). Now tighten the 2 screws on the white part of the solenoid, untill its tight. the reason to do this is that these screws dont come tight from the factory. Its a very simple proccess, you probably think its harder then it really is. Besides that, all you have to do is the simple stuff. just read the manual, and you will be fine. And no, the only guns you hafta time are autocockers.

__________________
Feedback
Electric blue vision shocker f/s/t
Louis Vitton halo shells, retro straps, shocker pipe kit
Hot Proto F/S/T

elementboarder5

and are you talking about bkos or what?

__________________
Feedback
Electric blue vision shocker f/s/t
Louis Vitton halo shells, retro straps, shocker pipe kit
Hot Proto F/S/T

Mangobutter

i was ore think of the b2ks

__________________

CrazyWeasel

No there is NO timing, it operates nothing like an autococker. And yes it is VERY easy to field strip, especially when you chop. Take out the pin for the bolt, 2 seconds, slide bolt out, 3 seconds, wipe off bolt, 2 seconds, put bolt and pin back in place, 7 seconds. That's basically it....

__________________
Oh Noes...

~}Did I miss the 5 O'Clock free crack giveaway?!{~

Mangobutter

another thing is it worth the extra money for the pds???

__________________

CrazyWeasel

Depends on how fast you shoot and what hopper you have. It all depends on the situation.

__________________
Oh Noes...

~}Did I miss the 5 O'Clock free crack giveaway?!{~

sakurai

If u have a halo B, probably not, but an egg. i believe its worth it.

__________________
give me $257890984762534263, now, or ill eat your babies

M3-BlackDragun

i would get the PDS but u dont need to get it right away..see how it is with out it and if u want to or need to send it to ICD and get PDS installed...but they are close in price now so id get the B2K4 with PDS its like 450 and the Regular one is 400 so...

__________________
--Was'd Impulse
--MaXy Reg
--SuPaFlY Bolt
--MIni MaXy LPR
--Was Equalizer Board
--Blade Trigger
--Ultra Light
--68/3000 Tank
--Halo B Loader

Mangobutter

could you send me a pm with wher ethe best place to buy those b2k4's are please thanks

__________________

sNoW PIrAnHa

there kinda is timing but its incredibly simple. Just screw out your LPR til it doesn't cock then screw it in 'til it cocks plus another quarter turn. You should be able to push the bolt somewhat easily. Then you just use the inline to adjust the velocity. Also if you buy used make sure that you switch all the dipswitches so they're on the right (off), sometimes it'll slow down your MROF if you have any of them in the on position. Just air it up and slap a hopper on and you're good to go.

__________________
"I have no mercy or compassion in me for a society that will crush people, and then penalize them for not being able to stand up to the weight"- Malcom X