skinny_k

ok my friends just got a 04 bushmaster and he went to the field and played with it. He said it chops like a mother (he told me his hopper ran out of batteries) so that Y i think it chops but he said it chopped before his hopper ran out of battery. So would a new bolt help it stop chopping?? I have heard hte vapor bolt is aswesome. Plz help me

sNoW PIrAnHa

You're either using crappy paint, a slow hopper, or an undersized barrel.

__________________
"I have no mercy or compassion in me for a society that will crush people, and then penalize them for not being able to stand up to the weight"- Malcom X

skinny_k

well actullay he has a halo B w/rip drive, evil paint, and the stock barrel

sNoW PIrAnHa

Then he probably set his LPR too high or the evil was swollen and dimpled. The more force against a ball the more likely it is to break thus turning down the LPR would be a good idea, plus it would make it a little more efficient.

__________________
"I have no mercy or compassion in me for a society that will crush people, and then penalize them for not being able to stand up to the weight"- Malcom X

BkoMasta808

You said he has an 04 Bushy, does it have PDS or no? If it does, did he turn it on? Also, tell him to replace batteries in halo and in the bushy. Tell him that if that doesnt stop it, to test for blowback and to do the oring bolt mod of he has blowback. Also, his LPR could be set to high, which would cause more pressure then is need to propel the ball, which would put more pressure on the paint, therefore, making it more likely to break.

bennieboy2290

or he could be missing detents like i am ....... that would make it chop

__________________
ICD owner #32



Black to blue B2K4 PDS | Black to blue Check It unimount | 68/45 high pressure Crossfire HPA tank

c'mon, it sounded funny... i had to

Pr0ph3t

Do the detent modifications.

__________________
-Nick