Thread Tools

smartparts_2011 · December 19th, 08:55 PM

Does any one know how to fix a mini? the problem is that it dry fires, but wen i put paint in it, it shoots around 10 feet, the dwell is very high, ive tried it at factory setting but it didnt help, the velocity is as high as can be i think, u change the velocity by the asa right? please help me

TBDragonMan · December 20th, 11:45 AM

No you do not. You tinkered withthe regulator(the thing you thought was tha ASA). Velocity is adjusted with the gold screw on the back of the marker. Read The manual. It explanes it all.

smartparts_2011 · December 22nd, 01:08 PM

wow, sum one told me that was how u do it with the reg

gixxerific · December 23rd, 12:29 PM

wow is right, make sure you adjust the reg back to around 200 as well. As said above the velocity adjuster is on the back side of the barrel. Turn it in all the way but don't crank it tight, than back it out 1 - 1 1/4 turns that will put you in the ballpark. Make sure you get it chrono'd before you start playing with other people.

TBDragonMan · December 23rd, 08:08 PM

Always read your manuals. Taking someones advice who doesn't own a mini(obviously the guy who told you this doesn't) could cause a bit of problems as the set up is a little differant than most. The regulator is new to the market. Reset everything to stock and get it crono'd. Good luck.

smartparts_2011 · December 25th, 01:06 PM

thanks for your help

smartparts_2011 · January 6th, 12:10 AM

another question, how do you tighten the reg/ asa?

JH · January 6th, 12:35 AM

There is a large silver screw on the underside of the reg/asa.

smartparts_2011 · January 6th, 09:21 PM

yea i saw that but, i dont have the allen wrench to, did it come with it?

JH · January 7th, 01:08 PM

It should have come with it.

gixxerific · January 8th, 08:09 AM

Stop, don't mess with the screw on the bottom of the reg unless you now what you are doing. That is the blow off.

Please watch this video. http://www.youtube.com/watch?v=Vi97YpubgRU

There is everything you want to know, all the disassembly vids and much more at PBNation.com in the stickies. Check them out it'll do ya good.

Look Here --->>> http://www.pbnation.com/showthread.php?t=1901430

Thread Tools

View more Paintball photos