ok so of course now that i got this mini i have some issues and need a little help, the issue today is with the reg. i have an inline on/off asa and if i slowly turn on the pressure the guage keeps climbing and climbing untill it is over 300 psi and starts venting out the bottom (btw miller you were correct on that vent plug, but i was thinking you were talking about the purge not an overpresurization port) i unscrew the reg all the way out and nothing, it still spikes the guage, i tried both my tanks to make sure the tank reg was not the problem.
it worked when i got it so something has happened since then
also if anyone knows there i can find the sizes on the o-rings throughout the mini i could really use it, its not in the manual
__________________
Quote:
Originally Posted by Crawdaddy
I'm not going to lie if I were rich and famous I'd be running people over with my car all the damn time.
blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off
man i had to post this over on the nation, now i feel icky. i hate asking them for help
__________________
Quote:
Originally Posted by Crawdaddy
I'm not going to lie if I were rich and famous I'd be running people over with my car all the damn time.
blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off
found a video, i think i know what i did, pretty sure i installed the front cap wrong, putting too much pressure on the main spring and therefor cranking the pressure up too high. as soon as i am done installing CS4 i will try to fix it
__________________
Quote:
Originally Posted by Crawdaddy
I'm not going to lie if I were rich and famous I'd be running people over with my car all the damn time.
blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off
fixed, yup sure enoufgh that was it, when i disassembled it i didnt pay close enoufgh attention to the cap and how far it was screwed in, so when re-assembling it i just cranked it on untill tight which put too much pressure on the main spring and over presurized the reg
its still a piss poor design though.....
__________________
Quote:
Originally Posted by Crawdaddy
I'm not going to lie if I were rich and famous I'd be running people over with my car all the damn time.
blue to black dm6
hyper 3
top hat mod
laser eyes
CP flow plug
32 degrees drop forward (yes i like my drop forwards)
cp micro on/off asa
deadly winds 14" fibur barrel with full freak
Dye rotor with speed feed
centerflag 68/4500 with on/off
-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
If you believe in God, and are proud of it, put this in your sig.
-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
If your a Christian paint baller put this in your sig.
-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
If you make your own custom parts put this in your sig.
-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
If your parents DON'T pay for your paintball stuff, put this on your sig.
-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
mini reg issues
