SCATHED

Okay so i have a very very slight leak in my ion. i can only hear it if i'm listening very closely or if i put my ear up to the feedneck. so therefore i can't tell where exactly it's coming from. it results in my getting bad efficiency so help is appreciateed. thanks. everything is lubed by the way.

__________________


Method X Kidz
Thanks to our sponsors:
Seek N' Destroy paintball
Xpaintball.com
Empire paintball

evolkers2003

You have 3 hoses, the one that is the 2nd shortest (the one that geos in by the eyes) is probably broken/leaking. If its not that hose its on of the others. If you wanna change it personnally the you need to take the banjo off, cut the hose off the barb (be very carefull, especially on the middle hose because that barb is plastic while the rest are metal) and then cut a peice of hose to the lenght of the old one (they usually give you precut lengths when you buy it) and out one end on the barb and the other into the banjo. Im pretty sure this should solve the problem. Ive ahd this happen to me before and it was always the hoses.

__________________

Sex on tv cant hurt unless you fall off.

Paintballman19

Yeah, the hose in my gun is pressed down when i screw the body in. It loosened the hose from the metal the slightest bit that i could hear a leak, so i cut some of the body so the hose could have more room and now no more leak . But yeah just do what he said.

__________________

92% of teens move to rap music. if your part of the 8% that stayed with rock,put this in your sig
Smart Parts Owner #220 Paintballman19
89X Listener

Mortisdeum

Sounds like it might be one of the bolt o-rings. One of them may have been scratched or nicked a some point so some air is slipping by. Also Check the Bolt stops, O-rings as well for any nicks or cuts.

__________________
Tippmann Owner #330, Smartparts Owner #63, Autococker Owner #208
Pump Owner (Latest Project Gun)

Tippmann Mods:
Spring Loaded RT, Mirror Polished Internals , High Flow Valve, Full auto Mod

Smartpart Mods:
Ion Foamie

Cocker Mods:
EZ Timing Bolt

evolkers2003

Yeah, if its not the hoses relube the orings and then if it still deos it than change the o-rings but im still pretty sure its that middle hose because you can really only hear it coming out of the barrel and this has happened to me. Bad efficiency and a leak out the barrel is common signs of the middle hose being broke or leaking.

__________________

Sex on tv cant hurt unless you fall off.