MartyJ

I have a stock Ion that after I shot it today noticed that there is a slight air leak at the bottom of the regulator. It seems like it is coming from the regulator and not from the 90 elbow fitting. It is very slight air leak but I would think that there should be no air leaking out of the regulator. What is the best way to fix this?

Any help would be appreciated.

Thanks,

Marty

evolkers2003

This should have gone in the ION forum. Are you suer its from teh reg? i think it might just be new macro.

__________________

Sex on tv cant hurt unless you fall off.

MartyJ

I am almost positive it is coming out of the regulator. It is either coming from the bottom of the regulator or from the top of the 90 elbow microline fitting. I guess I will take the regulator apart and re-grease the o-rings to see if that fixes it. I was just wondering if that is the best way to fix a leak if it is indeed coming from the bottom of the regulator?

Thanks

evolkers2003

Im not very good with regs but i would also get new o-rings.

__________________

Sex on tv cant hurt unless you fall off.