sniper1010

I have a JT eccerlator 9.0. I cant get it to work anymore. I took it to my local pro shop to see if they could fix it and they drew up a bank. I can get it to shoot, but it shoots and then it wont re-cock. Any ideas? I was using co2 on it.

__________________
My what a strange bunch of people we have running around here.

Team captain of the NY Rejects #00

old rusty car

most likely fill your c02 tank or lube your bolt a bit

hit me up on aim


x ray is god x

__________________

rate my dynasty shocker

10 days till rasta fly

kazoo

I think you mean 6.0. But either you have 2 oil your bolt or your sear isn't hitting the striker all the way.

__________________
lolerskates

sniper1010

Nah i tried that. ITs not workin. The bolt is really scratched up on the bottom too. Im really cunfused her.....

__________________
My what a strange bunch of people we have running around here.

Team captain of the NY Rejects #00

JugaLug

I am having the same problem with my 5.0. What can be done to check if the striker is being hit all the way, and how do you adjust it.

MedicDVG

the bolt scratching is normal unless there are burrs on it. You can polish the bolt with some 660 grit sandpaper to take the sractches out.

Most every problem with a stacked tube blowback marker tends to deal with o-rings. Try removing the o-rings from the bolt, striker and valve and inspect them carefully. Recocking issues tends to be a loss of air pressure from the valve o-rings leaking, or the bolt o-rings leaking. Inspect the o-rings and replace them if needed. Also, when reassembling your marker make sure to coat the orings with a good air tool oil or dow 33 grease and that may solve your problem.

__________________

JugaLug

I have been working on getting my o-ring replaced. I live in Japan and have to get everything over the internet. Can anyone give me a good site to order the o-ring from. It is slightly larger than a tank o-ring, and local hardware stores don't have the right size.

JugaLug

After ordering a few parts to replace what could be the problem, I have found the only place that air doesn't flow thru easily is at the top of the expansion chamber. It looks like a screen is in the hole. Does the screen belong there, and is it there to control the air flow?