Thread Tools

**JT_Gosu** · October 23rd, 07:39 PM

I need ANY possible upgrade for my JT 6.0 that will help it's preformance! Please be specific, and if possible state where you can purchase and the price range. Thanks!

**wackwar** · October 23rd, 07:59 PM

hpa would help ur performance alot, especialy in the winter. i have no clue what kind of bolt a jt uses, but if u get hpa than an aka lightning bolt would be great. if u can t-board it that would be awesome, but again idk if u can do on a jt what u can on a spyder. an lightning bolt would cost around $50 and hpa can range from $80-$300. i have no clue how much a t-board costs.

**JT_Gosu** · October 23rd, 08:01 PM

t board? I have nowhere to fill hpa, thats whats keepinmg me from getting a tank.

**wackwar** · October 23rd, 08:06 PM

t-board
thats should explain it better. it says all spyder electrics, but that still doesnt nessacerily mean u cant use one. jt's are very close spyder clones.

**JT_Gosu** · October 23rd, 08:16 PM

36 bps?!

**JT_Gosu** · October 23rd, 08:20 PM

I'm pretty sure i'm getting a derlin bolt..so yeah

**Jtpaintball70** · October 23rd, 11:07 PM

that T-board DOES look like it will fit

Now to recoup some money and then let the splurging comence

**JT_Gosu** · October 24th, 11:57 AM

I'm getting a derlin bolt..anything else? I'm talking all possible upgrades that would help my gun.

**kidpaintballer** · October 30th, 01:23 PM

Yeah there is no way that you could get a JT up to 36 bps just to let you know, it just cant handle that, just like almost every other gun on the market!!

I would get a new bolt and barrel and a hopper if you dont already have one

**skinny_k** · December 8th, 04:25 PM

t board, new reg, new hopper, bolt

**spyshark** · December 8th, 07:12 PM

Well does the 6.0 have a reg?If not get one,spyder barrels fit but the spyder LPCs do not fit the jt has a courser thread.You can make a tboard fit check PNB in the JT section,there are two differnt camps of doing it and one is less compilcated.Ebay has delrin bolts they are like 21.00 shipped.Asisde from HPA wich everyone says and a good hopper that is about it.Down the road you may regret putting money into it.Oh there is a guy over the nation that is making a proto type air ram so they can be converted into a pnumatic.Might be awile before he has a final production piece.You can also add a drop and a ASA with on/off.Or just get a ESP spder frame and then tboard my brother in law is getting a JT for xmas after xmas i can tell you for sure if they woul fit because i will have access to one to put a frame on and see.

**SOME VIRUS** · December 15th, 10:29 PM

hopper is a first, if you don't have that then u MUST get one.

microswitch, they are cheap and will help your ROF TREMENDOUSLY! ask Huey, I'm pretty sure he has one..

and pretty much bolt.

The stock barrel on the JT's is actually rather accurate no matter what anyone says. I have one so I know.. I also tried a teardrop on it with no change in performance.

**Cmrdz28** · December 21st, 04:28 PM

get a new bolt, I personally have tried the spudnuk'l bolt and its great, the new microswitch is good but the stock board sucks plain and simple. good news though with some modification the T-board does fit. your first upgrade definately should be a new barrel though. electronic hopper is a must to especially if you get a t-board.

i fit the board in the JT with NO DREMELING but it is a very tight fit and I do not plan on keeping it that way. here is a video of my 6.0 with T-board.
http://www.jasonslan.com/uploads/JTnoair.avi

Thread Tools

View more Paintball photos