Torch

Got a used Imagine in today and found no spring, or a very weak spring, in the detent. I tried to take it apart to put some sort of spring in there and well... it didn't survive.

How should I have taken it apart? Was it possible without breaking it? It looks like the plastic was just fused together after it was built, so I'm not sure it's something I should have tried taking apart.

__________________
"RD&D - Research, Development, and Design. - If its not broken, fix it anyway."
T.O.G. #131 - P.O.G. #16 - C.O.G. #145 - Tippmann Forum Moderator
Rate the: 98C SL-68-II Feedback
Other members flaming your posts? Help is available
PBF boys still play with Trucks. Check out www.trukz.com

tmaxx_2.5

might have been defective. Call/e-mail kingman. Or just go buy one, shouldn't be more than a few bucks.

Did it work in the first place w/ paint? Or did you just tear it apart b/c it felt weak?

__________________
Louisiana Tech University Paintball
Powered by KEE Action Sports

PBN Feedback
PBF Feedback

Get Your Duct-Tape Flowers Here!

Torch

Yea they're cheap

I took it apart because the ball was stuck in the 'in' position and wouldn't pop back out. Didn't get to testing it with paint...I noticed it while I was tearing it down to check everything.

Oh well...not a major loss.

__________________
"RD&D - Research, Development, and Design. - If its not broken, fix it anyway."
T.O.G. #131 - P.O.G. #16 - C.O.G. #145 - Tippmann Forum Moderator
Rate the: 98C SL-68-II Feedback
Other members flaming your posts? Help is available
PBF boys still play with Trucks. Check out www.trukz.com

tmaxx_2.5

ya, just get a new one.

__________________
Louisiana Tech University Paintball
Powered by KEE Action Sports

PBN Feedback
PBF Feedback

Get Your Duct-Tape Flowers Here!