Thread Tools

prostock05 · May 26th, 03:01 PM

I got the 2005 electra and it SUX SOOOO BAD. the first time i played with it it broke and wil hardly shoot. do not buy this gun

Torch · May 26th, 03:28 PM

What's wrong with it exactly? How did it break? Did you fix it? Is that why it barely shoots?

**Stan** · May 26th, 03:31 PM

im sure anyone with spyder knowledge could fix it, give us some things taht are wrong with it, i bet its a quick 2 minute fix

prostock05 · May 26th, 04:01 PM

ok for 1 thing the halo keeps jamming, but thats not the whole reason because it doesnt work with the hopper off. when i shoot it, it makes a wierd sound and the bolt does not re-cock itself. it keeps doing it too, yes I had a lot of air and the velocity was up at around the regular speed.

**Stan** · May 26th, 04:09 PM

it doesnt work ith the hopper off because the eyes will not let teh gun cycle if there's not a ball in teh breach. as for teh recocking, try rasing teh pressure out put on teh reg to get some more airflow

prostock05 · May 26th, 04:12 PM

it doesnt have eyes or a reg, only an expansion chamber

**bobide** · May 26th, 04:18 PM

so ur halo is jamming-this has nothing to do w/ the gun. and everyone knows that halos won't feed when they are off. So i don't see these as problems.

For ur weird sound and no recock......if it's a metal bolt, polish it. Also oil ur o-rings.

**Stan** · May 26th, 04:21 PM

ok, nvm on that then, idk y i thought the new kingman guns had eyes but ok, anyway

what do u mean it doesnt work with the hopper off? the halo jamming sounds liek a problem with teh halos eyes or board, and check to make sure the frame is screwed in tightly, or teh sear and hammer might not be catching very well

prostock05 · May 26th, 04:23 PM

the bolt is delrin, i no the halo has nuthin to do with the gun, i already said that. the halo is on and wont feed, the halo even says its its jammed when its off

Torch · May 26th, 04:26 PM

I'm going out on a limb here, but shoot the gun without the halo on, or with another hopper.

Is the ACS bolt binding on something that could cause it to collapse enough to not recock?

prostock05 · May 26th, 04:43 PM

the front of the acs bolt has tonnes of small black scrapes all over it, and a few in the middle, couild this be the problem? what would cause something like this?

Torch · May 26th, 04:56 PM

It could be swolen. If you put it in the gun, without the hammer attached to it, and push it like it would move during a shot can you feel it bind up at all?

prostock05 · May 26th, 05:01 PM

yea it doesnt move smoothly the whole way, it scrapes a little and it is harder to push at a certain point

Torch · May 26th, 05:03 PM

That could be a problem. A little harder to push shouldn't do much, but if it was stiff enough then it would go into its 'ACS action'.

**Stan** · May 26th, 05:04 PM

a lot of acs bolts have had defects, call kingman up and have them send u a new one, since the first batch was poor quality

prostock05 · May 26th, 05:06 PM

the inside of the gun where the bolt sits is kinda scraped too, is that a problem?

**bobide** · May 26th, 05:07 PM

i'm pretty sure taht's bad for a delrin bolt...

Torch · May 26th, 05:10 PM

Derlin shouldn't scratch the aluminum at all.

Take the gun apart, clean, and re-oil everything. Look for random metal shavings or anything else that doesn't belong.

prostock05 · May 26th, 05:18 PM

can i use wd-40

Torch · May 26th, 05:21 PM

Not a good idea for your O-rings, or really anything else.

Also don't oil the bolt. Oil and derlin don't get along with each other.

Paintball oil first, gun oil or air tool oil second, I hear ATF fluid will work if you're in a bind.