94325ic

Just Got The Gun.. Cock The Gun , Air It Up And When I Go To Shoot It Doesnt Recock So I Have To Cock It After Every Shot .. All The O Rings Are Good And The Gun Is Lubed .. If Anyone Could Help It Would Be Much Appreciated

MidwestKidz

umm first off please try and not put a capital at the beginning of each word. ok to the problem, take the hose off where it meets the the foregrip and see if a little gold piece inside is like sideways. Your not getting enough flow and thats what happened to me.

__________________

Torch

Just got the gun, eh?

Did you have the air tank filled first? They do not come filled from the factory.
Any field or most sporting goods stores will fill it for a couple bucks.

__________________
"RD&D - Research, Development, and Design. - If its not broken, fix it anyway."
T.O.G. #131 - P.O.G. #16 - C.O.G. #145 - Tippmann Forum Moderator
Rate the: 98C SL-68-II Feedback
Other members flaming your posts? Help is available
PBF boys still play with Trucks. Check out www.trukz.com

94325ic

I took the expansion chamber off and put the tank directly on the gun and its still doing it

94325ic

took and topped off the tank before shooting it .. not first time playing paintball. just getting back into it

94325ic

any more suggestions ...

MedicDVG

I would suggest totally disassembling and cleaning the marker. Pay special attention to the ASA and the cup valve springs to see if there is anything that is obstructing flow. Also, make sure the black bumper is in the right place behind the striker.
Last thing would be to try a new battery -- sometimes low voltage can do wierd things to the marker.

__________________

Lokbomb

Turn up your velocity...the screw at the back of the marker...turn it clockwise to raise the velocity of the marker.

__________________

dog shooter

ya that should make it work. When I was shooting my Imagine I remember my bolt wouldent come back either, then I relized that my arm had accidently unscrewed the tank a little bit, and no air was getting through. So I tightened the tank and it worked perfect. But after I took the tank off it was leaking through the needle part, so I had to go get it replaced, havent tried the replaced one yet.

so It might be your tank.

CKY2K

Check the striker bumper....Make sure that is on the back of the striker

__________________
Smart Parts Ion
Virtue Board
Virtue blue Membrain
Virtue blue eyes
FBM Kage Blue custom body for the SP Ion
10' CP pro two peace barrel
Blue '06 CP Rail
Black '06 CP on/off ASA
Blue '06 Hybrid B!tch Grips
Black Trinity Mini T lock feed neck
TeckT L6 Bolt
Sp 360 QEV
Black CP Reg
Blue Dusted Cp sling Blade Trigger
Blue macro line
4,500 PSI 88CI HPA Tank
2006 Blue Redz Tank cover
Blue Halo B Hopper with Rip Drive and Victory Board
If you want to know the specks on my Kingman Spyder Electra ACS 05 Pm Me

#223

Dogpatch

As said, completely disassemble the marker and check everything. Blow air through all the parts to be sure you are getting air everywhere it needs to be.
You didn't mention any leaks while aired up, but make sure the valve is in correctly. The large hole should be towards the front.

__________________

PBF Feedback +2/-0 PBN Feedback +5/-0 eBay Feedback +10/-0