M1ke

sup guys i have a spyder imagine with the eframe. so far i have drilled out the VA, lightened the hammer (a lot), removed the venturi, and cupped the bolt. oh and i polished everything. i can definitely tell the difference in kickback after this. havent chronoed or have a gauge so i couldnt tell ya how much it helped out there

so im wanting to go low pressure using co2. hpa is outa the question
i just ordered a rocket valve and centerflag inline regulator. what else should i get?

im thinking a dye boomstick and a cheaper agitating hopper. what would you guys suggest
oh and i think im too fast for the stock board cause when im really tryin to shoot fast it only shoots every other click. so im guessing ill need a board upgrade?

here's my gun. i used a bench grinder the "mill" then end
there are no aftermarket parts on it yet. the black peices i painted (or tried to)

txaggie08

i like the halfblock. Dont go to crazy dumping to much $$ into non transferable upgrades. Get a barrel kit, a decent hopper etc.

__________________
Proudest member of the Fightin Texas Aggie class of 08 Beat the h*** outa tu A Whoop!!!!.

If you need help, IM me. I'm around alot of the time and will answer questions happily . *Driftcav03*

RL timmy FS ultra cheap

Daziak

ya, try to not put so much money in a low grade gun (they're fine with some ups but LP on a spyder isn't worth it compared to the mid grade guns) but if u have fune uppin it till u get another one thats fine just be sure to save some money for Paint and a new gun. or save up for HPA which will definitly increase performance.

__________________

Props to MustangMan on the awesome new Matrix sig!

martix_agent

I talke dto some reffs at my field about goin LP with a spyder just as a project and they said they've seen plenty of spyders that went LP and had all sorts of burping problems. I'd look into a delrin bolt, that'll really reduce your cycling mass. If you have a dremmel you can take weight off the striker as well.

If your'e amxing out your stock board (mostlikely) look into getting a tboard. And if you get a t-board you'll need AT LEAST an eggy. GEtting a t-board with eyes is a better option, but then you'd have to drill for eyes and buy/make eye covers.

__________________

If your a Christian paintballer put this in your sig.

Pristine Promaster for sale $160!

M1ke

i just got a sp linear 16" today. didnt want to shell out the dough for a whole kit. i have done almost all the lp mods from otters site. the hammer is dramaticaly lighter after i put it to a bench grinder. ive done everything i can do to it stock except the valve but im getting the rocket valve which is on the way along with a centerflag regulator 200-600psi. so i figure a tboard and a agitating hopper soon and im good to go.

btw i dont really plan on ever getting a new gun cause i mainly play woodsball and will venture to the recball feilds a few times.

here's what it looks like. soon it'll be covered in camo duck tape

Attached Images

0628061907.jpg (5.4 KB, 41 views)

JH

i think you should get hpa unless there are no places to fill nearby. then get a halo b because if you buy and egg you will break it also replace the feed tube

M1ke

what are the benifits of hpa? is it quieter than co2?

fenix_freak

HPA is much more consistant (in velocity) than co2 and is much better for the gun because it isn't cold like co2 is.

I personally wouldn't buy anything else for it. Just do small home mods...it's pointless to dump a bunch of money into a spyder because no matter how much you upgrade it...in the end, it's still just a spyder. Save up for a gun worth upgrading.

M1ke

eh im not getting another gun and i dont want to. i cant justify spending the money on a higher end gun when im not competing

anyways, i got the regulator in and the valve has been shipped.

what are the threads that go into the bottom line? they are the same on the regulator and i need to get a 90* fitting and some hose to connect the bottom line and my new reg.

M1ke

ok so this is what i ordered, bassed on the fittings into the bottom line hopefully being 1/8 NPT

https://palmer-pursuit.com/ecom/prod...c88e9216213bde
https://palmer-pursuit.com/ecom/prod...c88e9216213bde
https://palmer-pursuit.com/ecom/prod...c88e9216213bde
1ft of https://palmer-pursuit.com/ecom/prod...c88e9216213bde

its basically their macroline kit but i saved 50 cents by having only 1 ft and i got an on/off switch so i wouldnt have to keep unscrewing the bottle b/w games

so you guys think it'll fit? are the threads on the bottom line duckbill thing 1/8th NPT? i hope so cause that means ill have my LP gun air'd up and ready to test/tune. ive got a centerflag reg/guage and the rocket valve is on the way.