twopointshotdr

hey guys, dont even know if this is the right thread....

but hey, i played a game the other day..and while i was playing...all of a sudden tons of air started spurting out the hose. more so towards the top by my regulator. i have a kingman rodeo. so after the co2 was disconnected...obviously the co2 stopped spurting everywhere i checked the hose. it looks good and fine...but i noticed the o ring b/w the hose and the regulator looked like it was sticking out a bit. so i thought air was coming out from the sides of it then. so after taking it home...i took off the expansion chamber so i could fix the o ring...and i fixed it..it seemed nice and flush. it wasnt broken or anything. so i tightened up the screws again to tighten up the expansion chamber...and the hose seems nice and tight and flush..as well as the chamber. when i went to hook the air back in...it didnt shoot air every which way. which is good! BUTT...instead i noticed on my regulator i wasnt getting any pressssure! so hmm..(forgot to mention i did fiddle a littttle bit with the screw that controls pressure) but i put it back to way that looked origionally...and still no pressure...i dont even recall hearing the neat little hiss you get when you hook up the air normally. so i said hey..screw it let me try cocking it. so i cocked it back...and instead i got full freaking auto!!! ahh...it took me by total surprise...and just went shot after shot after shot..full auto. which in turn froze up my regulator area quite a bit! its since "thawed" out...GOD WHAT SHOULD I DO?! ANY COMMENTS WOULD BE APPRECIATED...AND HELP OF COURSE..THANKS. im thinking of taking it to the dealer...he was a cool guy...and gave me like a 5 year unlimited warranty inhouse. for all work..except part costs...soo i might stop by there...but in the meantime..any help!?

lovetocheat69

Im guessing when you say full auto you mean that it was burping and the gun was starving. This would mean that the gun isnt getting enough air flow to fully cycle. Sounds like a bad reg. Unless you had the trigger frame off which I think you might have because you were fixing the reg. So explain a little more.

__________________

jst854

it sounds to me like you ran out of co2

druneon

or if you took the trigger frame off you may have tightened the valve screw too much. that would cause it as well. just moving the valve screw sometimes causes the same effect. like said above please explain a little more in detail.

__________________

Frozen Paint

You need to adjust the reg some more, get more pressure into the gun, either that or your CO2 tank is almost empty.

You dont need to take it back to the "dealer" theres nothing wrong with it, you just need to learn how it works. If ya need some more help, hit me up on *******, link in sig.

__________________
Feedback: pbnation.com paintballforum.com

COCKER OWNER # 57 HECK YESH!


A recent study shows that 92% of all teenagers moved on to rap, put this in your sig. if you're one of the 8% who stayed with real music.