OC_Nooby

ok, so i got a Spyder Xtra and well, I LIKE IT!!!

First question, how do i take this mofo apart to clean it properly?

Where do i put oil?
o-rings?

What type of hopper should i get as the gravity hopper sometimes get jammed and well i just shoot co2

And damn this thing shoot straighter then the tippman custom 98...

whitty_1

congrats and the xtra is prolly my favorite low end mech gun. i also think it is far more accurate than my 98c.

so to take it apart, you take out the small 'clip' or pin on the right side of the gun that goes through the main field strip pin which goes through the body to the other side. then you pull out the big field strip pin and then pull out the velocity adjuster, then the bolt, and the striker should come out with the bolt. then you can take out the valve by taking off the VA(where the front grip screws into). once you get that off, you unscrew the little gold screw i think and then push the valve from the back of the body until it comes out the front. then you should have all of the internals taken out.

to oil it up, put a few drops of gun oil in the ASA(where the tank goes) and then hook up your tank and shoot like 50 shots with the barrel off. that should spread it throughout the gun.

__________________
Tippmann 98 Custom-Empire 7 pc. barrel kit, APE Double Trigger, Low Pressure Kit, Palmers Male Stabilizer, Drop Forward, Rocket Cock 2 cover part, Quick Strip Mod, Polished Internals, Dye Sticky 3 Grips

Trilogy Pro SF Cocker

Egg 2 Hopper

Crossfire 68/4500 Fiberglass tank

chris_13

^^ nailed it on the head^^ just rember how you took the parts out of the gun and put them back in the same way. i also like the new xtras i love mine but i cant fit any more ups on it lol...

__________________
im a christian baller are you?

tjg92

On the Kingman website there are video tutorials on how to take apart and mantain the marker. Use these in combination with the diagram and you'll be fine.