TRspyder20

My friend's spyder xtra is very troublesome to shoot. When you cock the gun and fire most of the time, two or three paintballs are being shot with one pull of the trigger in semi-auto. The balls are coming out very slow and curving. It is not the paintballs because we tried them in my spyder vs3 and they worked. Can someone give me some advice?




Edit: Everything is stock on the gun. We are using a full co2 tank as well.

SpyderACSTyler

Not too sure but it has to do with air in the gun. Somethings broke, haha, not much help. But Ive seen multiple people have that same exact issue so your not alone.

paintball96

ive seen paintwork in one gun and curve in the next with different barrels...may sound simple but play around with the velocity a little...also check and make sure ur ball detend is inplace and working

TRspyder20

it is not the air works on other imagines and is not the paint, it is doing it with all types of paint.


EDIT: Ball detend?

paintball96

corection ball detent...its below the direct feed. if you unscrew it there is a little rubber piece inside that keeps the ball in place, keeps it from rolling out of the barrel, and prevent you from shooting more than one ball.

chris_13

its not a little rubber piece its a ball being pushed with a small spring in it so when then gun shoots it can slide back into the detent and slide back out after the bolt has gone past.

__________________
im a christian baller are you?

paintball96

sorry the old xtra is different

TRspyder20

Took apart gun and found ball detent was problem, he needed a small spring adjustment and it was working fine again.

Thanks for the help.