tippy98

I just picked up a Spyder Imagine from my friend. He says I can have it if I fix it. The problem is that the gun will shoot once but the it wont recock. Any ideas what might be the problem?

HuNtS

tighten the trigger frame, if it's tight, oil the internals, if they're oiled and it still does it replace o-rings, if all that's done and it still keeps uncocking, check the sear and hammer for excessive wear. almost 100% positive it'll be one of those problems. if you have any other questions about your imagine just ask, i have one as well so i should be able to answer most of you ?'s

__________________

tippy98

I replaced the o rings and oiled it but the problem is puzzling me. I dont even think the bolt is trying to recock. It is like its just getting stuck. This is the first spyder I ever worked on so its kinda confusing to me.

HuNtS

try tightening the trigger frame onto the body and see if the sear (the black thing that kind of flicks when you pull the trigger) or the hammer (the black metal piece in the bottom tube) have excessive wear on them so that they wouldnt catch one another.

__________________

tippy98

Thank you HUnts. Im not sure which problem it was but I worked on everything you said and it started working perfectly again. Thanks alot for the help.

HuNtS

no problem, if you need anything else, i'm on daily, so it shouldnt take me long to respond

__________________

tippy98

Ok now i got a new problem. The spyder was workin great but now it started to not cock again. Instead of just not trying to come back it is kinda like a jackhammer. Is it because the sear is worn down? Im not sure.

JH

i think you are out of co2. if not it is probably the sear