jrnymanwv

OK here is the problem, for the better part of the last 12 cases of paint i have had but one problem. the on and off O rings tear once in a while. Other than that nothing unusual, well until now. i always have lubed and cleaned my marker well. so i dont think that is the problem. but, now the marker justs double fires and uncocks. i ran some oil in the asa a few times and it seemed to work a little but not for long. if i turn the air up on the lpr it stops, trouble is the velocity is way too much. soo, i put a light spring in it and got the velocity down some but it is now back to double firing again. my question is what the heck is going on? anyone have this prob?

Weever

Need more info : what's your setup ? Are you running N2 or Co2 ? Is there any leak with your marker ? Put more info, as much as you can.

__________________
How to maintain and use a spyder VS1
How to maintain and use a spyder VS2
Spyder VS1 review
Spyder VS2 review
VS and MR series explanation here
#64
Spyder VS2
68/4500 PMI tank
Blue body kit
Vlocity Jr.
AND
Spyder VS1

jrnymanwv

as far as setup, i am running hpa using draxxas 68/4500 redz pepperstik barrel kit. and an egg 2. i really think the regulater in the on off is junk. i am thinkin of getting an adapter and puting a better reg on it or something of the sort. I may try to rebuild it first and try again.

Weever

Yeah I heard some regs have died on theses markers... You should call Kingman on this, maybe they could help and fix your gun without any charges...

__________________
How to maintain and use a spyder VS1
How to maintain and use a spyder VS2
Spyder VS1 review
Spyder VS2 review
VS and MR series explanation here
#64
Spyder VS2
68/4500 PMI tank
Blue body kit
Vlocity Jr.
AND
Spyder VS1

YouCantSeeMee

^^Kingman is usually really nice about things like this. They have really friendly customer service reps too. They should be able to solve or fix the problem with little to no charge. Keep us posted.

__________________
2005 Ego: Virtue board, Hybrid grips, Star frame, Star trigger, Star regulator, Cure bolt, CP on/off, Lucky Unitech barrel.
Crossfire 70/45
Empire Reloader B

jrnymanwv

Ok kingman was great and they got things going ok so far. I am thinking of getting an aftermarket low pressure regulator like either a cp regulator or a hyper 2 and a new guage and on and off for the thing. my question is will a aftermarket reg hook up to the vs2 or is there an adapter that has to be bought for it? personally i have a dye and i love the hyper2 it is a great reg.