carcrazycorey

ok guys I decided to get the VS1. I got it and I shot some rounds and I love this gun. Tommorow Im paintballing at a private field with some friends with there Mechanical guns I bought 1500 rounds so I should be good. Friend is letting me borrow air since Im almost out. Pics:







also Is that gap supposed to be that big? It was hard putting in the battery because there is wires in the way.

mLuH

Goodluck. Have fun

__________________
Thanx A LOT Predator14

Buy my stock NXT
http://www.paintballforum.com/electr...ml#post2027536

carcrazycorey

thanks man, next up is going to probably be a 14-16" J&J barrel. Im leaving to go paintballing in like 20 minutes with some friends in a private lot. This will be my first real test on the gun.

skapunkin

If I were you I'd make a barrel my third or fourth mod.

1. Clamping feedneck -- reduce the hopper profile and eliminate cheap feedneck adapter.
2. Expansion Chamber or Regulator -- if you plan on sticking with CO2
3. HPA tank -- if you don't plan on sticking with CO2
4. Barrel

__________________
ska's 98C · lapco bigshot 8in · dop powertube · tippman exchamber · polished internals · shocktech drop · inverted cp asa

ska's SLG · stock

ska's E99 · stock

carcrazycorey

whats the expansion chamber or regulator needed for? What will happen if I don't get onE?

skapunkin

CO2 is compressed in a liquid-ish state and is volatile. This means that lots of things affect it's behavior and performance. CO2 will exhibit shootdown and spikes in pressure sometimes due to these conditions.

-angle of tank
-temperature
-rate of fire
-lots of things

an expansion chamber usually replaces your front grip with a louvered chamber (that you still use as a front grip) so that the CO2 has more room and time to expand into a complete gas state. This allows for the CO2 to act more like a less volatile propellant... such as high pressure air, which doesn't have this problem.

A regulator/stabilizer is an active valve that holds a certain operating pressure. I'm not the best for explaining this as some of the more technical fol,k around here can you give you the word for word explanation.

I gotta go to work. I hope this helped.

__________________
ska's 98C · lapco bigshot 8in · dop powertube · tippman exchamber · polished internals · shocktech drop · inverted cp asa

ska's SLG · stock

ska's E99 · stock

Dark.angel

Nice Choice.

carcrazycorey

ok so how much would a regulator and Expansion Chamber cost?

kenny_1491

He will not be able to buy a regulator for that gun, notice on the reg it uses the same ol spyder stlye reg adapting system(two allenscrews screwed into a donut looking piece for attachment).

__________________




Magenta for RB

carcrazycorey

ok what about an expansion chamber where do I get one for this gun?