Thread Tools

**JG.** · July 22nd, 09:26 PM

Turns out i had the wires wrong. The way the switch was put in was opposite of the stock one so the black wire was supposed to go to the top instead of bottom.

**KingFikiElectra** · July 23rd, 02:38 AM

Quote:

Originally Posted by Denzil

So did you leave that metal lever that's on that RadioShack switch or did you remove it before installing the switch?

Either way. I just ripped it off. ITs pretty flimsy.

**i bunkered u** · July 23rd, 10:31 AM

Quote:

So did you leave that metal lever that's on that RadioShack switch or did you remove it before installing the switch?

the lever is the whole reason y the switch is so light. u can get non lever switches in which the pull wont be longer for cheap as well. but the lightes i've seen those are lik 50 or 25mg.

**Denzil** · July 23rd, 03:47 PM

Yeah I kind of figured you would keep it on because I was testing to see if the pressure on the switch without the lever was any better than the switch I already ha on my electronic markers and it didn't seem like it.

**CrazyWeasel** · July 28th, 12:13 PM

Quote:

Originally Posted by KingFikiElectra

Acctually for a spyder its alot lighter. Stock ones are at 250. 50 Is a nice jump.

HAhaha holy crap...Thats crazy.

**Javaman** · July 28th, 02:22 PM

So you guys using the 50gram switch don't have any problems with the return speed? As light as my stock one is it seems like a lighter one would slow me down since it would take longer to pop back to home position.

**KidPaintball** · July 28th, 03:53 PM

Naw, do the magnet thing I wrote about, and leave the little bar on the front. It will be fine.

**KingFikiElectra** · July 28th, 08:38 PM

Quote:

Originally Posted by Javaman

So you guys using the 50gram switch don't have any problems with the return speed? As light as my stock one is it seems like a lighter one would slow me down since it would take longer to pop back to home position.

Yeah the magnet mod basically takes care of it completly. But even without it its not bad. I also sanded down the button a little bit to get as close as possible.

**JG.** · July 28th, 09:40 PM

does the bar go / or \ ?

**Javaman** · July 28th, 11:42 PM

Wouldn't adding a magnet increase the return strength the same way as having a stronger switch like the stock one? What's the difference between a magnetic pullback and a mechanical spring (stock microswitch or trigger spring) one? I must be missing something.

**KingFikiElectra** · July 29th, 03:00 PM

Well the magnetic one can be adjustable. Also if you want u can reverse the polarity so it pushes back on the microswitch (250G). That also reduces the pull and I prefer that over the 50G switch.

But it really just adds enough pull (If adjusted right) to take the trigger off the micro switch.

**JG.** · July 29th, 08:01 PM

so which way does the lever go on the 5 gram one. I put it in like /[], but im not sure if its right.

**KidPaintball** · July 30th, 01:37 PM

Thats how I have it...Hey Fiki, is it possible to rename this thread? Its not just the switch thread anymore..It might get more people if it said differ mods too or something...Just a thought...

**KingFikiElectra** · July 30th, 01:40 PM

U can do it if u want. When u edit the first ppst there is a option at the top to rename the thread.

**KidPaintball** · July 30th, 09:26 PM

I must have missed that..I'll try!

Tryed, and I just rennamed the tile in the thread, not the actual, "outside" name...

**KingFikiElectra** · July 31st, 01:53 PM

Odd I tried to. Wanna just delete this thread and copy and paste all the info to a new thread and have me stick that?

**HeadyNugz** · August 2nd, 12:02 PM

I'm not fully understanding the magnet mod. SO you put one on the tops part of the trigger right?? But where does the other one go??? Also, my bro just a cocker with a worrblade. His trigger is awesome. Will these mods make mine like his???

**KidPaintball** · August 2nd, 12:05 PM

No man, it will never be like a cocker Worr Blade. '

Any way, no you put a magnet under the trigger and one on the frame, under the trigger. See Otters link in my post!

**HeadyNugz** · August 2nd, 09:12 PM

i see where the one in the trigger goes, but does the one in the frame go like directly above the one in the trigger??

**JG.** · August 2nd, 09:14 PM

put it where it would be directly under the other one when the triggers is pulled all the way in.