Thread Tools

**KidPaintball** · August 3rd, 03:31 PM

Ya, you put it under so they repell, but I must warn, its a stronger pull, what I did was put obe under the trigger, and one on top of the trigger. Still comes back just as fast, but its lighter. There for its faster. When Ijust had the 5g switch, I hit 11bps over the chrono...With this I'm guessing 13 because I was firing and the gun turns off for 1 sec. it means you hit the cap.

**HeadyNugz** · August 3rd, 03:51 PM

So they are supposed to repel each other so that it pulls the trigger back faster after each pull???

For some reason i thought that they were supposed to push on the trigger so it would be easier to pull back.

**KidPaintball** · August 5th, 07:45 PM

No, then the trigger would push the switch in...

They are supposted to repel so the return is faster.

**HeadyNugz** · August 5th, 08:58 PM

I Cant Get The God Damn Trigger Switch Out. I Broke An Alan Wrench Trying To Get That **** Out And It Didn't Even Budge. I'm Pretty Sure I'm Hitting The Correct Side So I Dont Know What The F*uck Is Going On!

**HeadyNugz** · August 5th, 08:59 PM

by trigger switch, i mean trigger pin ............ my bad

**JG.** · August 5th, 09:13 PM

Hit it from the side opposite of the on off switch. Get a nail. The body should be bigger than the pin but the tip shouldnt. Give it one good whack, then pull the pin out from the other side.

**i bunkered u** · August 6th, 08:23 AM

ya take a nail or skinny pointy object and hit the side opposite to where u turn the gun on. make sure u unscrew all the plastic grip stuff. your gunna have to hammer out three little silver things. two near the switch and one the trigger. make sure u unscrew the grip frame from the body when doing this so its easier.

**KidPaintball** · August 6th, 10:37 AM

ya, you hit the star, GOING IN. When you are taking it out, hit the smooth side.

**i bunkered u** · August 6th, 11:04 AM

r u talkin to me?

**HeadyNugz** · August 6th, 04:25 PM

Ok, I finally got it.

Is it true that the magnetic trigger mod does not work on E-99's?

That would suck.

**JG.** · August 7th, 02:00 PM

Quote:

Originally Posted by HeadyNugz

Ok, I finally got it.

Is it true that the magnetic trigger mod does not work on E-99's?

That would suck.

No...why wouldnt it work?

**HeadyNugz** · August 8th, 05:27 PM

I dunno, some guys told me that. Maybe he was just a dumbass and couldn't figure it out.

**i bunkered u** · August 8th, 06:04 PM

this mod works on any esp

**KidPaintball** · August 9th, 08:58 PM

All my mods I listed work on all Kingman gun, cetp the EM1, as far as I know, that goes for the Nexion and Fenix I'm pretty sure...I dont know however if some of them will work on the Raven Primal. I'll prolly end up getting one and seeing first hand!

**JG.** · August 9th, 09:03 PM

Hey kid you should put a how to for the response trigger.

**Javaman** · August 10th, 07:23 AM

On kingman receivers, isn't there a hole in the bottom of the striker tube to let the air used to recock the striker out through the grip? It might be possible (although there isn't much wiggle room) to run a small hose leading that air to the trigger in order to assist in the trigger recoil.

**HeadyNugz** · August 10th, 02:30 PM

Is the pull on the 5g switch with roller lever only 5g with the lever?

I just ripped that thing off cuz I didnt order the on the the lever. I just dont know if just the button is 5g.

**JG.** · August 10th, 03:38 PM

Quote:

Originally Posted by Javaman

On kingman receivers, isn't there a hole in the bottom of the striker tube to let the air used to recock the striker out through the grip? It might be possible (although there isn't much wiggle room) to run a small hose leading that air to the trigger in order to assist in the trigger recoil.

Talking to me? There are two ways of making a response trigger. One is to connect the top prong of the trigger switch to middle one with a conductor. I just bent the prong and dipped solder from one to the other.

The other way is running a wire from the middle prong to the middle prong of an on/off switch. And the same for the top prong, then you can turn the r/t on/off. Hardest part is mounting the switch.

The only drawback is it fires when you turn the gun on. And also auto fire is useless because it fires continuosly when you release the trigger. Also you only need to pull the trigger for three shot burst not hold it down.

**KidPaintball** · August 10th, 04:10 PM

Sounds Not fieled legal. The opperating force is 5 grams.

javaman, not sure.

**Javaman** · August 10th, 04:10 PM

That mod sounds rather dangerous. In my idea, if it's possible, the trigger won't be assisted when being pulled but will for the return. It's like the best of both worlds.... Light trigger pull, but strong return. It really wouldn't take much air to kick the trigger back since there is so little movement + not much resistance.