Torch

Unless it's another mod, I would think it would mean that the trigger spring is replaced with a pair of small magnets to reset the trigger.

__________________
"RD&D - Research, Development, and Design. - If its not broken, fix it anyway."
T.O.G. #131 - P.O.G. #16 - C.O.G. #145 - Tippmann Forum Moderator
Rate the: 98C SL-68-II Feedback
Other members flaming your posts? Help is available
PBF boys still play with Trucks. Check out www.trukz.com

KidPaintball

Yes, so that there is not as much bounce.

__________________
-Niagara Hustle - 07
-rockland Hustle - 08
|PM7|


"Read. Comprehend. Post."

CustomTrendzInc

so i will be doing these mdos to my imagine. Then a good hopper like a tripod and then save up to play and such because iw ill only upgrade things that can be used on other guns.

__________________
Red Ego 6
PBN Feedback

Ahmadi6490

A Tripod? Wow, i've never heard of a hopper called a Tripod.

__________________
Feedback!

KidPaintball

It's that one for VL that is eather like a Q-Loader or its the diff. sized revvy one, where you chose the size of the hopper.

__________________
-Niagara Hustle - 07
-rockland Hustle - 08
|PM7|


"Read. Comprehend. Post."

mavsfan31

Ok, so me and tippyninja were gonna do the magnet mod and switch mod on my gun, but the trigger doesn't wanna come out. Any idea how to solve this problem?

__________________
John

Nor*Tex

y do u even post...

__________________

OSU

ZfrkS62

ok, i just did the lightened pull and the backslack mods on my Rodeo and they work great.

I need to add though, that anyone doing a mod that requires knocking out the trigger and sear pins, find a way to block the saftey on both sides. At somepoint in my work, i felt the slide for the safety slip past my finger and heard something hit the wall behind my tool box. All i can figure is that the jolts going through the trigger frame were enough to somehow push the detent ball and sping down enough to let the slide past and therefore released the tension on the spring which shot both the ball and pring out of my gun.

Luckily after some careful searching i found the ball on the ground under the table next to me. to give you an idea as to how small this ball is, the hole that these pieces fit into are just big enough to allow a 3/32in punch through to push the ball down enough to slip a flatblade screwdriver in to keep it down enough to slip the safety pin back in.

IF YOU LOSE THIS BALL OR SPRING YOU ARE ****ED! THESE PARTS ARE NOT LISTED IN THE DIAGRAM SO YOU WILL HAVE TO GET A NEW TRIGGER FRAME!

__________________

BrokenMonkey

So I won right?

__________________

sybergato

Can anyone link me to a 50 gram spdt switch, with the same specs as the 5 gram one? I messed up my vs1 switch pretty badly and am looking for a drop in replacement. The 5 gram one looks drop in but I'd like something with a little more pull to it. Thanks!! btw, Great write up!

(Edit) I bought the piece anyways, cause it was the only thing I could find. Final thought, it's nice in combo with the magnet trigger mod. It Rock man. Thanks!