Mangudai

^^

I know a new barrel could help but surely it wouldnt make the ball go that much further?

Spec74

Yes... just turn up your pressure and WHAAALAAAAA more distance. and no barrel will not make the ball farther. It'll just make it go more straighter.
Or you could try making a flatline... (GAY)

__________________
My setup
Spyder Xtra body *** CiP Assult Block *** Bob long LPC *** Omega Valve *** CP 12" barrel *** Kapp twist cocking rod *** 32* Spring Kit *** AKA lightning Bolt *** Vaporworks Feed *** Palmer stab reg *** TKO drop *** Macroline kit *** E-Frame *** 68/4500 tank *** Revi w/ X-board

Future upgrade
50 gram microswitch *** uncapped board *** ACE *** ACP hammer (whenever that is) *** Slasher trigger *** Anno *** Milling
=====================================
WTB: Tank Regulator

big_balla

All you can really do is try to decrease loss of pressure in each shot. A barrel wouldn't help anything, unless you have a bad paint/barrel match. IDK what would help with the pressure, but maybe a bolt and a reg. Do you use air or CO2?

But if all you want is distance, then you could get a spyder to tippmann barrel adapter, and go buy a flatline. The shroud would be useless, but hey... you want the distance .

Mike

__________________

[^_^x]

aim higher..... lol

outlaner_0990

there is no real way to increase distance besides the flatline, but that has many problems of it's own. just shoot at the max velocity of your field and that's your distance limit.

__________________
Alex

Mangudai

Ok, what would it take to runa high pressure operation, or would that puta lot of strain on my Victor 2....I use CO2 right now.

outlaner_0990

spyders already use high pressure operation, about 800 psi. that's high pressure in the world of paintball.

__________________
Alex

j_dogg

He's talking about high pressure air (HPA), or nitro (N2), or compressed air (CA), whatever you want to call it. Actually HPA is easier on the gun because it's more stable. Since Co2 is a liquid in the tank, it has to expand into a gas to propel the paintballs and power your gun. Since it expands at different rates at different tempatures, and due to the fact liquid Co2 can get into the gun and damage o-rings, Co2 is much harder on any gun. So, yes, your gun will run on HPA with no modification other than possibly a new mainspring.

__________________
flame Tribal BBT w/ Predator II
(soon to add Angel frame)
Dye throttle 71/4500
Halo B
ACI Graffiti Barrell

Trilogy Sport autococker

outlaner_0990

ah, i see. i had to read a couple more times but I got it.

__________________
Alex