Thread Tools

**ax23** · July 19th, 12:15 AM

What kit is better?

**GBRudy16** · July 19th, 02:52 AM

Well we don't exactly have a positive answer yet. I do not know if fiki has installed the one kit on his gun yet. And I do not know anyone with the xsf kit yet so its still up in the air. There are advantages to both such as a reg and consistency with the one kit. But if you are going to be getting an xsf-kit you should probably already have an after market reg running and be using Nitro. Anyway its still up in the air.

**Error** · July 19th, 10:05 AM

Fiki did get his one kit and he says it is awesome.

could someone send a link to the XSF kit

**caniborrowpaint** · July 19th, 10:46 AM

http://www.xsfadvantage.com/ There you go.

**Error** · July 19th, 10:53 AM

o that I would defenitly pick the one kit.

**samanoususke** · July 19th, 11:41 AM

Stay away from the XSF Kit. It's basically an overpriced board w/eyes and eyecovers. Stick T1 kit.

**ax23** · July 20th, 12:35 AM

But is the regulator that comes with the one kit any good?

**Error** · July 20th, 12:36 AM

not the greatest regulator ever but not the worst I guess in the middle.

this is what the one kit will do
it changes your spyder to air ram (I still don't completly get air ram)

Quote:

Originally Posted by KingFikiElectra

Nope the system is like a BKO. What that means is....

1. The gas goes into the reg and air is in the PB gun. From there air is set into a LPR which is a Low Pressure Regulator.

2.From the low pressure regulator SOME air is put into the grip frame using small micro line.

3.When the trigger is pulled rather then having a sear the air that was sent to the grip frame has another piece of micro line that pushes the "striker" and makes it hit the valve pin like any other spyder allowing the rest of the air to come in like any other spyder and shoot the ball.

So basically rather then having a sear it uses the rest of the excess gas and uses it to propel the ball. Saving battery and air at the same time. Since there is no sear there is alot less power consumtion and since ALL of the aitr is being used (or most of it) you lose less ai in the prossess.

**D FO** · July 20th, 12:37 AM

i would personnally save my money and buy a new better gun

**Error** · July 20th, 12:40 AM

well with the one kit you change your spyder to something that is similar to a BKO or a timmy so wouldn't it be a high-end gun then?

**ax23** · July 20th, 12:42 AM

But would it be better to install a better regulator and a T or IS board or that kit?

**D FO** · July 20th, 12:43 AM

not realy it may be like a bko but i forget how much does the one kit cost and still it woudnt even be close to the sam level as a timmy. but imo just save it sell your gun and get a nicer gun

**Error** · July 20th, 12:43 AM

Quote:

Originally Posted by ax23

But would it be better to install a better regulator and a T or IS board or that kit?

In my opinion no because air ram is much better.
"The One" is 200$

how much do T and IS boads cost?

**D FO** · July 20th, 12:44 AM

Quote:

Originally Posted by ax23

But would it be better to install a better regulator and a T or IS board or that kit?

yes that would be a good idea get a new reg and the is board

**epsilonbass** · July 20th, 08:21 AM

From what everyone says the one kit has so/so reg, and some people dont exactly like the triggerframe, weird angles, cheaplike, whathaveyou. So in this way the question people seem to be not asking directly is buying the system to change your gun to air ram worth the mediocre parts it comes with, or should you spend the same amount of money to get a good reg, and t-board, and just trust in the original striker system.

if anyone has this answer let us know... also if you did get the one kit, couldnt you upgrade some of the parts, like a new reg, larger drop down? i guess since people are planing to spend 200 on the kit they dont wanna spend any more on upgrading parts they just bought.

**Badinflewinse** · July 20th, 11:45 AM

IS board is 70 dollars
T board 65 dollars
Good reg 75-90 dollars

**Stan** · July 20th, 11:49 AM

i would get the t-board, which is aroung $60, (the IS has been dicontinued) and a bob long topedo reg, $55, THats $115 bucks, and then all you have to buy is eye covers and your set

**Ahmadi6490** · July 20th, 12:18 PM

Dragon The One, i've heard great stuff about it. It also looks good.

**i bunkered u** · July 20th, 12:33 PM

listen here! the one kit is not really meant for speed. the one kit is designed to change your gun to lp and fire like a timmy. i hate the xsf kit! period. way to overpriced! the IS boards are not longer being manufactured because nerobro, the guy that makes them, died or something like that. i think he is workin on a new version with a full auto capabality. the t-board is able to purchased and is gunna run u 65 bux plus shipping. some sites have offers to avoid the shipping costs so make sure u check them out. the t-board is there is u want the speed. the t-board caps at 36bps which is fast enough for all of us! i u really want a fast marker go with the t-board, lighter switch, and most likely an acpb slasher trigger. if u want lp stick with the one kit. its all up to u. srry for the long reply!

**D FO** · July 20th, 12:54 PM

oo i didnt know they stopped making the is board then i would wait for acp to finish there kinetic board its magnetic and it sounds sweet