Thread Tools

**Error** · July 20th, 02:05 PM

ok this is stickied at pbn but no one ever listens to me there and they flame me so much.

ok after reading it I have found all the parts and the cost
Ram 18$
Ram Sleeve 45$
Ram Cap 20$ (haven't found)
6 barbs 25$
Cocker Hose 5$
Timmy Lpr 50$ (haven't found)
Poppit 30$ (haven't found)
Cupseal 5$ (haven't found)
Solenoid 60$
Entropy chaos board 95$
Trigger Frame 150$
Inline reg 60$

total of 558$ for everything new

My parents don't use e-bay and won't buy from other people over the internet so I can't get anything used. so are there any other cheaper things I could get new from a online store?

also if anyone knows how this would compare to the one kit
and if this will fit my victor II

Johnny_Fred · July 20th, 02:14 PM

Why don't you just buy a timmy? they would look a lot better

**Error** · July 20th, 02:17 PM

Quote:

Originally Posted by Johnny_Fred

Why don't you just buy a timmy? they would look a lot better

I don't have enough money to buy a timmy. this is much cheaper then buying a timmy.

**Stan** · July 20th, 02:24 PM

you can buy used classics timmys for around 500, but it would be really cool to to a spyder-timmy conversion

**Error** · July 20th, 02:26 PM

yes thats why I want to do it

anyone know of others stuff I can get cheaper new.

read my first post I can't get anything used.

**bobide** · July 20th, 04:09 PM

Ya a conversion is so cool. You walk onto the feild and start asking how to cock the gun and doing newb stuff, and saying "i just got this spyder aren't they the best gun" or "i hope i don't get bunkered (then whisper "whatever that is" for a friend)". Or stuff like that, then you just rip the crap out of everyone! I mean the feild will be all yellow man. B/c everyone will have wet themselves when you throw out a line of paint and touch everyone.

Sry i got no idea where to find parts for cheap

**Tex** · July 20th, 05:53 PM

Classic timmy is better, because thats essentially what your building, however you would have to modify the body a bit among other things. Cost wise, if you look around it should be about $300 for the parts if your lucky (check forums). However, all your doing is buying timmy parts and slapping them on a spyder body. It would be better just to get the timmy instead. The one kit is alright, but for $50 more you could just get the one. What I did was I bought a Spyder body for $20, a 1 piece AA barrel for $34, a spudnukl bolt for $20, and the one kit for $170.

Its decent, a spyder timmy would be better, but then again, it would be a timmy with a spyder body, not much point to it.

mjdragon11 · July 20th, 08:58 PM

jsut buy a timmmy why would u put 550 bucks into a ****ty victor? seriously or get a 04 vert cocker thats 350

setup
spyder imagine
12inch smartparts progressive
spudnukl bolt
check it sweetspot stick trigger
empire reloader smoke
flame drop
5g micro switch
48ci 3000psi pure energy tank
dye rhino tank cover
jt proflex mask

**Error** · July 20th, 09:03 PM

Quote:

Originally Posted by mjdragon11

jsut buy a timmmy why would u put 550 bucks into a ****ty victor? seriously or get a 04 vert cocker thats 350

setup
spyder imagine
12inch smartparts progressive
spudnukl bolt
check it sweetspot stick trigger
empire reloader smoke
flame drop
5g micro switch
48ci 3000psi pure energy tank
dye rhino tank cover
jt proflex mask

ok once I do this conversion and I already have a nice 14" barrel. Then after thats done give me reasons why my victor II would be ****ty.

**outlaner_0990** · July 20th, 10:10 PM

wow, that kid who flamed you doesn't understand that the gun you will have when done will be able to compete with every tourney gun out there. while his 1337 imagine will still be a sear tripping high end wanna-be.

as for comparisson to the one kit, it will kick the **** out of it, so do this conversion or buy a timmy instead. used gz's go for around 6-700. and you won't find parts cheaper than that if you can't buy used mate.

i was considering doing this conversion myself, but owning and operating a real timmy was just much more appealing. and i only spend 650 on a gz, tank, and a hopper so i didn't spend too much anyway. i'd go with a used real timmy, or do this if you can't buy used.

**Error** · July 20th, 10:27 PM

thanks I think I will do the conversion.

**Tex** · July 20th, 10:59 PM

No, just get a used one. Its much cheaper. You will need to have a machinist modify the body a bit I believe.

**128shot** · July 20th, 11:07 PM

I hear the conversion is more of a tinker thing. If its really something you wanna do then go for it. Its also really cool to do this instead of buying a new back up gun which would cost about the same. I saw a video of a timmyspyder and they aren't slow by any means. Not wannabe either i thought, its just different.:-) I say go for it if you really wanna

**samanoususke** · July 21st, 10:34 AM

I suggest just buying a used Timmy and using the parts from that. That way, when you don't feel like using your Spyder anymore, you will also have the Timmy body, feeedneck, etc. Just transfer the guts, and you have yourself a Timmy.

**Error** · July 21st, 05:55 PM

my mind is set on this conversion I am not buying a timmy.

**tmaxx_2.5** · July 21st, 06:15 PM

are you mechanically inclined by any chance? B/c if you aren't this is gonna be hell to do.

**outlaner_0990** · July 21st, 08:29 PM

guys, you obviously familiar with this conversion. you don't really have to do any modifying besides drilling holes and cutting out the top of you marker. anyone with a drill and a dremel could do the body work in under 15 minutes. it's actually very easy, and, no, used timmys aren't cheaper, just better to have the real thing.

**Badinflewinse** · July 21st, 09:10 PM

Post pics when you get this thing working. Also seems like everything as far as price was is right.

**Error** · July 23rd, 04:53 PM

well I won't have this for a while but when I do I will post pics.

**outlaner_0990** · July 23rd, 07:10 PM

ah, i just realized one error with your parts list. get an LCD frame so you can buy the frenzy board. if you don't want to go that route, buy an LED and get a WAS board.