Mugenr

I bought a Vertical Adapter with LPC outlet, Bob long Torpedo, Bob long mini deluxe gauge (0-1200psi), Macroline hose( 1 foot), macroline fitting 90*....
do i need anything else? do i need a fitting for my stcck bottom line?
I'm using stock drop and bottom line... Do i need to get a straight macroline fitting? and do i need a metric to US converter?
thanks

__________________
::Spyder Rodeo::
- Poor Man's Lightning Bolt - 20oz CO2 tank - J&J Cermaic 14" barrel - Shocktech LPC - 9v Revvy - Bob Long Torpedo - Standard Vertical Adapter with bored out hole - Macroline - CIP low-rise feedneck - Shocktech US to Metric adapter - Bob Long Mini Deluxe gauge (0-1200 psi) - Macroline fittings (90* and straight) - Polished Internals - Dye Sticky - drilled VA and ASA - 32* spring kit -

::FOR SALE::
- Evil Delrin Bolt (used once for test fire) -

GBRudy16

yeah you will need a metric to US converter in my experience... when you cut the line make sure its a straight cut or else it might leak a bit. But you have just about everything I can think of. probably need a metric fitting to the hose fitting so 2 things I think if I'm reading your post right. If you have ANY trouble at all just take it to your pro shop. Also it may seem like it will screw in but its not get the metric converter.

__________________
IF you need any help with a question or anything feel free to IM me. GBRudy16x on AIM

Badinflewinse

I think you need a straight micro line adaptor for your asa. I did for my imigane.

__________________

Mugenr

metric to 1/8" or NPT adapter is the same thing as Metric to US adapter right?

__________________
::Spyder Rodeo::
- Poor Man's Lightning Bolt - 20oz CO2 tank - J&J Cermaic 14" barrel - Shocktech LPC - 9v Revvy - Bob Long Torpedo - Standard Vertical Adapter with bored out hole - Macroline - CIP low-rise feedneck - Shocktech US to Metric adapter - Bob Long Mini Deluxe gauge (0-1200 psi) - Macroline fittings (90* and straight) - Polished Internals - Dye Sticky - drilled VA and ASA - 32* spring kit -

::FOR SALE::
- Evil Delrin Bolt (used once for test fire) -

tmaxx_2.5

yep, sure is, looks like that'll do it

__________________
Louisiana Tech University Paintball
Powered by KEE Action Sports

paintballjunk12

How much did that reg cost ya?

Mugenr

50 bucks from somewhere online... can't post here.. search on froogle

__________________
::Spyder Rodeo::
- Poor Man's Lightning Bolt - 20oz CO2 tank - J&J Cermaic 14" barrel - Shocktech LPC - 9v Revvy - Bob Long Torpedo - Standard Vertical Adapter with bored out hole - Macroline - CIP low-rise feedneck - Shocktech US to Metric adapter - Bob Long Mini Deluxe gauge (0-1200 psi) - Macroline fittings (90* and straight) - Polished Internals - Dye Sticky - drilled VA and ASA - 32* spring kit -

::FOR SALE::
- Evil Delrin Bolt (used once for test fire) -