Thread Tools

**kaminski** · August 3rd, 09:05 PM

for my spyder imagine what grips could i get that would be comfortable, allow to view the lcd, and use the ipi?
input is welcome
thnx

**tmaxx_2.5** · August 3rd, 09:07 PM

dye stickey-3's enuff said

**JG.** · August 3rd, 10:01 PM

Quote:

Originally Posted by tmaxx_2.5

dye stickey-3's enuff said

**IIMsmartII** · August 3rd, 10:06 PM

^^^Tis the truth

**tmaxx_2.5** · August 3rd, 10:18 PM

ha, well i guess you got your answer. They are really nice tho, very comfortable, can see LED, have to get the ones for spyder frames though, not just normal ones.

**Denzil** · August 3rd, 11:34 PM

Anyone have any pics of Dye Sticky 3's on their ESP frames? I'm curious as to how they look with the LED's on.

**Javaman** · August 4th, 08:31 AM

Make sure to get the E-spyder stickies 3, not the standard DYE sticky 3s. The standard ones won't work at all since the screw hole placement is different. It uses 2 holes centered on each side of the grip opposed to the E-Spyders 3 screw holes staggered around. Also make sure to get the newest revision of the E-spyder stickies. The early models weren't cut quite right to clear the battery or solenoid. (I can't remember which) Your best bet would probably be to order directly from DYE even though it might cost a bit more. At least you'll be sure to get the right one. I went with the black ones and am pretty happy. The LEDs are visible just like with the stock grips. Unfortunately the grip tends to catch the actuating part of the solenoid if I squeeze the upper part of the grip too tight. I can't really take any material off of the grip there since it is kind of thin there but it doesn't cause me any misfires so I don't worry about it too much.

**tmaxx_2.5** · August 4th, 10:37 PM

heres a pic of mine w/ them on

paintballjunk12 · August 5th, 07:06 AM

Remember that there is more than just ^ color

**kaminski** · August 6th, 02:44 PM

hey will the stickey grip at this site http://xpaintball.com/dyeest3gr.html
fit on the imagine?

**Javaman** · August 6th, 03:18 PM

It should as long as it's different from the picture they show (They say it is) since that is the design used for the standard Sticky 3s. Make sure they have the newer revision of the E-spyder grips with the proper cutout for both the battery and solenoid.

**kaminski** · August 6th, 05:23 PM

so they will work even though on the imagine the trigger frame has one finger divider so i will be safe to purchase these grips

**Javaman** · August 6th, 05:52 PM

It fits around the finger divider just fine on my old style Imagine (pre '04)

Thread Tools

View more Paintball photos