paintballjunk12

Sometimes when i am shooting my gun the little long metal piece that pushes the part that goes down to let the blot go forward doesnt go back into the coil set and it uncocks my gun, anyone know y?

Badinflewinse

Not really sure it sounds like yo uneed to make sure it isn't worn down. Also check to make sure the sear spring for it is in good shape

__________________

HuNtS

yeah, it sounds by how you described it is like the hammer isnt catching the sear, check to see that your sear spring is working good, and that your sear isnt worn down too much....

__________________

paintballjunk12

The sear isnt going all the way up because the thing in the grip that pushes it to go down doesnt go back in sometimes

MedicDVG

Electro or mecanical? If its a mech, then you need a new sear spring as this one is too loose. If it is a electro, then look to the solenoid to see if the plunger is moving all the way back and forth. You may need to lube it. Fiki should be able to tell you more on that as I am a mech guy and don't know a whole lot about electros.

__________________

paintballjunk12

Its electro, and yea i thought about lube but i also thought about lube getting on the electric part