Kdrx1

My electric trigger frame on my imagine doesn't fire. The black cylinder- i cant rememember what that is called- seems to have a bad connection. Hitting the trigger makes the blue light flash and everything but the solenoid doesnt get pushed down. As far as i can tell the black wire that connects to the black cylinder is broken because if you push the entire black cylinder towards its wire the trigger frame works.

I think i have a disconnected wire in my esp trigger frame, can i fix it? Do i have to send it to Kingman? Will it cost anything if i do?

__________________
Feeback
MidWest

Virtued Olive Pm6

outlaner_0990

if you don't know anything about electronics, send it to kingman. if you do know a bit, find the break and fix it with a heat-shrink wrap.

i know it sounds dumb, but make sure you have a charged/good battery.

__________________
Alex

Stan

the black cilider your talking about sounds like teh soilenoid. Youcan get a soildering tool and try to soilder teh wires back to eth noid or call kingman and they will fix it

__________________

Ahmadi6490

If you get a pic of it up....and I think it is what I think it is, then you can send me JUST your trigger frame and I can souder it up and replace it up with new wires. But you gotta cover shipping.

__________________
Feedback!

Kdrx1

Thanks for the offer ahmad but imma just send it over to Kingman after i tinker with it for a little bit.

__________________
Feeback
MidWest

Virtued Olive Pm6

Ahmadi6490

Ok, but don't expect it to come back to you directly. It will take at least 1 week for the total process.

__________________
Feedback!