RyaX

Well recently my gun has occured a big issue..... well I turn on my electric frame and everything is fine but then when I'm all loaded and cock my bolt and presh the trigger Nothing! As I take a better look it looks like the hammer is stuck or impossible to move. It's sort of confusing but Im just wondering if anyone can help.

Thanks In advance!

__________________
Ryax 4Life 0?

Spyder_Pimper#1

ox i would check out the orins,and i would take apart your gun and oil everthing,this should work if u need moer help pm me.

MedicDVG

I think Spyderpimper is right.. Probaly shredded an o-ring and got it pinched in the frame. Now.. How to get the striker out to correct the problem... I would take the barrel off and get a dowel rod or a some type of stick. Set it in the barrel threads against the bolt and gently tap the bolt/striker assembly out and inspect it.
Its either that, or a paint shell is wedged in the bolt assembly..

Let us know how it turns out.

__________________

Stan

or try oiling your gun, or you might have put teh striker buffer in before teh striker, its a simple mistake, check that

__________________

RyaX

There's no paint and no oring stuck, the gun is clean. But for some reason the bolt doesn't cock when I hit the trigger.

__________________
Ryax 4Life 0?

BakerSkate

Guess ya got a problem there...

RyaX

I do.. and I know The gun will be fixed however the paintball store that I usually go to is Backed up on gun re-pairs and they probably wont be able to see it in 2 weeks and I hate that because I got some "park" games coming up

__________________
Ryax 4Life 0?

Master of Paint

battery dead? i remember the same happened to me when i had my rebel and i used a 9.6 volt rechargeable battery as opposed to a regular 9 and i was problem free.

I think you just need a new or more powerful battery. try that out.

__________________
_Clark


Only real men know how to count to eight: 18436572
Make your own Hoff Plane!

Spyder_Pimper#1

well just to be on the save side try what medic and i said,and yea it could be you put the buffer before the striker,and i would take it apart and oil it,because if some of those doesnet work then i dont know ill have to thank about it more,because there is only a limited amount of stuff that can happen to blowbacks,and only a few solutions to them,one of the good things about blowbacks,pm me if u try this and it doesent work. glad to help ya

Zues

Ya i had the exact same problem with my Rebel and since the rebel is a spyer clone
i would haha like everyone else oiling the gun. good luck with that problem

larocket83

That happened to me, but it wasnt an oring, but actually a chunk of the hammer chipped off and jammed inside. it scarred everything up, luckily i had a warranty on it. That was right after i bought it from a friend. he obviously never oiled it. But everyone tells me that theyve never heard of it happening to anyone else, so i doubt thats the problem.

tmaxx_2.5

do you have air on the gun, or are you just dry-cocking it, if you dont have it aired up it willl not re-cock...

__________________
Louisiana Tech University Paintball
Powered by KEE Action Sports

Valgard

Don't have one of the electric frames myself but can't you take the whole trigger frame off by undoing two screws?

If you can do that, power up the frame and see if the sear moves when you squeeze the trigger. If that works then you know that your frame is OK.

If the frame is OK leave it off and manually cycle the bolt, make sure things move smoothly.

Then disassemble the rest of the marker, check that everything is OK (parts come out in the right order, nothing is missing, broken, scratched oddly, put in backwards, etc). Clean and reassemble, try it again.

Javaman

Your comments seem at odds with each other...

"There's no paint and no oring stuck, the gun is clean. But for some reason the bolt doesn't cock when I hit the trigger."

and

"well I turn on my electric frame and everything is fine but then when I'm all loaded and cock my bolt and presh the trigger Nothing!

Are you able to cock the marker correctly? You can move it back into position and gets caught on something (the seer) and won't release when you press the trigger? Does it make a ticking noise when you press the trigger? Do you have an air supply hooked up?

__________________
By the time a man realizes that maybe his father was right, he usually has a son who thinks he's wrong.